vramik b0a1550df5 KEYCLOAK-5586 crossdc tests on Wildfly using real database

2017-10-04 12:00:18 +02:00

29 KiB

Raw Blame History

How To Run various testsuite configurations

Base steps

It's recomended to build the workspace including distribution.

cd $KEYCLOAK_SOURCES
mvn clean install -DskipTests=true
cd distribution
mvn clean install

Debugging - tips & tricks

Arquillian debugging

Adding this system property when running any test:

-Darquillian.debug=true

will add lots of info to the log. Especially about:

The test method names, which will be executed for each test class, will be written at the proper running order to the log at the beginning of each test class(done by KcArquillian class).
All the triggered arquillian lifecycle events and executed observers listening to those events will be written to the log
The bootstrap of WebDriver will be unlimited. By default there is just 1 minute timeout and test is cancelled when WebDriver is not bootstrapped within it.

WebDriver timeout

By default, WebDriver has 10 seconds timeout to load every page and it timeouts with error after that. Use this to increase timeout to 1 hour instead:

-Dpageload.timeout=3600000

Surefire debugging

For debugging, the best is to run the test from IDE and debug it directly. When you use embedded Undertow (which is by default), then JUnit test, Keycloak server and adapter are all in the same JVM and you can debug them easily. If it is not an option and you are forced to test with Maven and Wildfly (or EAP), you can use this:

-Dmaven.surefire.debug=true

and you will be able to attach remote debugger to the test. Unfortunately server and adapter are running in different JVMs, so this won't help to debug those.

JBoss auth server debugging

When tests are run on JBoss based container (WildFly/EAP) there is possibility to attach a debugger, by default on localhost:5005.

The server won't wait to attach the debugger. There are some properties what can change the default behaviour.

-Dauth.server.debug.port=$PORT
-Dauth.server.debug.suspend=y

More info: http://javahowto.blogspot.cz/2010/09/java-agentlibjdwp-for-attaching.html

JBoss app server debugging

Analogically, there is the same behaviour for JBoss based app server as for auth server. The default port is set to 5006. There are app server properties.

-Dapp.server.debug.port=$PORT
-Dapp.server.debug.suspend=y

Testsuite logging

It is configured in testsuite/integration-arquillian/tests/base/src/test/resources/log4j.properties . You can see that logging of testsuite itself (category org.keycloak.testsuite) is debug by default.

When you run tests with undertow (which is by default), there is logging for Keycloak server and adapter (category org.keycloak ) in info when you run tests from IDE, but off when you run tests with maven. The reason is that, we don't want huge logs when running mvn build. However using system property keycloak.logging.level will override it. This can be used for both IDE or maven. So for example using -Dkeycloak.logging.level=debug will enable debug logging for keycloak server and adapter.

For more fine-tuning of individual categories, you can look at log4j.properties file and temporarily enable/disable them here.

TODO: Add info about Wildfly logging

Run adapter tests

Wildfly

# Prepare servers
mvn -f testsuite/integration-arquillian/servers/pom.xml clean install \
   -Pauth-server-wildfly \
   -Papp-server-wildfly

# Run tests
mvn -f testsuite/integration-arquillian/tests/other/adapters/jboss/wildfly/pom.xml \
   clean install \
   -Pauth-server-wildfly \
   -Papp-server-wildfly

JBoss Fuse 6.3

Download JBoss Fuse 6.3 to your filesystem. It can be downloaded from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/org/jboss/fuse/jboss-fuse-karaf Assumed you downloaded jboss-fuse-karaf-6.3.0.redhat-229.zip
Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to Fuse repo):

mvn install:install-file
-DgroupId=org.jboss.fuse
-DartifactId=jboss-fuse-karaf
-Dversion=6.3.0.redhat-229
-Dpackaging=zip
-Dfile=/mydownloads/jboss-fuse-karaf-6.3.0.redhat-229.zip
Prepare Fuse and run the tests (change props according to your environment, versions etc):

Prepare Fuse server

mvn -f testsuite/integration-arquillian/servers
clean install
-Pauth-server-wildfly
-Papp-server-fuse63
-Dfuse63.version=6.3.0.redhat-229
-Dapp.server.karaf.update.config=true
-Dmaven.local.settings=$HOME/.m2/settings.xml
-Drepositories=,http://download.eng.bos.redhat.com/brewroot/repos/sso-7.1-build/latest/maven/
-Dmaven.repo.local=$HOME/.m2/repository

Run the Fuse adapter tests

mvn -f testsuite/integration-arquillian/tests/other/adapters/karaf/fuse63/pom.xml
clean install
-Pauth-server-wildfly
-Papp-server-fuse63
-Dfuse63.version=6.3.0.redhat-229

EAP6 with Hawtio

Download JBoss EAP 6.4.0.GA zip
Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to EAP repo):

mvn install:install-file
-DgroupId=org.jboss.as
-DartifactId=jboss-as-dist
-Dversion=7.5.0.Final-redhat-21
-Dpackaging=zip
-Dfile=/mydownloads/jboss-eap-6.4.0.zip
Download Fuse EAP installer (for example from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/com/redhat/fuse/eap/fuse-eap-installer/6.3.0.redhat-220/ )
Install previously downloaded file manually

mvn install:install-file
-DgroupId=com.redhat.fuse.eap
-DartifactId=fuse-eap-installer
-Dversion=6.3.0.redhat-220
-Dpackaging=jar
-Dfile=/fuse-eap-installer-6.3.0.redhat-220.jar
Prepare EAP6 with Hawtio and run the test

Prepare EAP6 and deploy hawtio

mvn -f testsuite/integration-arquillian/servers
clean install
-Pauth-server-wildfly
-Papp-server-eap6-fuse
-Dapp.server.jboss.version=7.5.0.Final-redhat-21
-Dfuse.installer.version=6.3.0.redhat-220

Run the test

mvn -f testsuite/integration-arquillian/tests/other/adapters/jboss/eap6-fuse/pom.xml
clean install
-Pauth-server-wildfly
-Papp-server-eap6-fuse

Migration test

DB migration test

This test will:

start Keycloak 1.9.8 (replace with the other version if needed)
import realm and some data to MySQL DB
stop Keycloak 1.9.8
start latest Keycloak, which automatically updates DB from 1.9.8
Do some test that data are correct

Prepare MySQL DB and ensure that MySQL DB is empty. See ../../misc/DatabaseTesting.md for some hints for locally prepare Docker MySQL image.
Run the test (Update according to your DB connection, versions etc):

export DB_HOST=localhost

mvn -f testsuite/integration-arquillian/pom.xml
clean install
-Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration
-Dtest=MigrationTest
-Dmigration.mode=auto
-Dmigrated.auth.server.version=1.9.8.Final
-Djdbc.mvn.groupId=mysql
-Djdbc.mvn.version=5.1.29
-Djdbc.mvn.artifactId=mysql-connector-java
-Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak
-Dkeycloak.connectionsJpa.user=keycloak
-Dkeycloak.connectionsJpa.password=keycloak

DB migration test with manual mode

Same test as above, but it uses manual migration mode. During startup of the new Keycloak server, Liquibase won't automatically perform DB update, but it just exports the needed SQL into the script. This SQL script then needs to be manually executed against the DB.

Prepare MySQL DB (Same as above)
Run the test (Update according to your DB connection, versions etc). This step will end with failure, but that's expected:

mvn -f testsuite/integration-arquillian/pom.xml
clean install
-Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration
-Dtest=MigrationTest
-Dmigration.mode=manual
-Dmigrated.auth.server.version=1.9.8.Final
-Djdbc.mvn.groupId=mysql
-Djdbc.mvn.version=5.1.29
-Djdbc.mvn.artifactId=mysql-connector-java
-Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak
-Dkeycloak.connectionsJpa.user=keycloak
-Dkeycloak.connectionsJpa.password=keycloak
Manually execute the SQL script against your DB. With Mysql, you can use this command (KEYCLOAK_SRC points to the directory with the Keycloak codebase):

mysql -h $DB_HOST -u keycloak -pkeycloak < $KEYCLOAK_SRC/testsuite/integration-arquillian/tests/base/target/containers/auth-server-wildfly/keycloak-database-update.sql
Finally run the migration test, which will verify that DB migration was successful. This should end with success:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml
clean install
-Pauth-server-wildfly
-Dskip.add.user.json=true
-Dmigrated.auth.server.version=1.9.8.Final
-Dtest=MigrationTest

JSON export/import migration test

This will start latest Keycloak and import the realm JSON file, which was previously exported from Keycloak 1.9.8.Final

mvn -f testsuite/integration-arquillian/pom.xml \
  clean install \
  -Pauth-server-wildfly,migration-import \
  -Dtest=MigrationTest \
  -Dmigration.mode=import \
  -Dmigrated.auth.server.version=1.9.8.Final

UI tests

The UI tests are real-life, UI focused integration tests. Hence they do not support the default HtmlUnit browser. Only the following real-life browsers are supported: Mozilla Firefox, Google Chrome and Internet Explorer. For details on how to run the tests with these browsers, please refer to Different Browsers chapter.

The UI tests are focused on the Admin Console as well as on some login scenarios. They are placed in the console module and are disabled by default.

The tests also use some constants placed in test-constants.properties. A different file can be specified by -Dtestsuite.constants=path/to/different-test-constants.properties

In case a custom settings.xml is used for Maven, you need to specify it also in -Dkie.maven.settings.custom=path/to/settings.xml.

Execution example

mvn -f testsuite/integration-arquillian/tests/other/console/pom.xml \
    clean test \
    -Dbrowser=firefox \
    -Dfirefox_binary=/opt/firefox-45.1.1esr/firefox

Welcome Page tests

The Welcome Page tests need to be run on WildFly/EAP and with -Dskip.add.user.json switch. So that they are disabled by default and are meant to be run separately.

# Prepare servers
mvn -f testsuite/integration-arquillian/servers/pom.xml \
    clean install \
    -Pauth-server-wildfly \
    -Papp-server-wildfly

# Run tests
mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    clean test \
    -Dtest=WelcomePageTest \
    -Dskip.add.user.json \
    -Pauth-server-wildfly

The social login tests require setup of all social networks including an example social user. These details can't be shared as it would result in the clients and users eventually being blocked. By default these tests are skipped.

To run the full test you need to configure clients in Google, Facebook, GitHub, Twitter, LinkedIn, Microsoft, PayPal and StackOverflow. See the server administration guide for details on how to do that. Further, you also need to create a sample user that can login to the social network.

The details should be added to a standard properties file. For some properties you can use shared common properties and override when needed. Or you can specify these for all providers. All providers require at least clientId and clientSecret (StackOverflow also requires clientKey).

An example social.properties file looks like:

common.username=sampleuser@example.org
common.password=commonpassword
common.profile.firstName=Foo
common.profile.lastName=Bar
common.profile.email=sampleuser@example.org

google.clientId=asdfasdfasdfasdfsadf
google.clientSecret=zxcvzxcvzxcvzxcv

facebook.clientId=asdfasdfasdfasdfsadf
facebook.clientSecret=zxcvzxcvzxcvzxcv
facebook.profile.lastName=Test

In the example above the common username, password and profile are shared for all providers, but Facebook has a different last name.

Some providers actively block bots so you need to use a proper browser to test. Either Firefox or Chrome should work.

To run the tests run:

mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
      -Pauth-server-wildfly \
      -Dtest=SocialLoginTest \
      -Dbrowser=chrome \
      -Dsocial.config=/path/to/social.properties

Different Browsers

Mozilla Firefox

Supported version: latest ESR (Extended Support Release)
Driver download required: no (using the old legacy Firefox driver)
Run with: -Dbrowser=firefox; optionally you can specify -Dfirefox_binary=path/to/firefox/binary

Mozilla Firefox with GeckoDriver

You can also use Firefox automation with modern Marionette protocol and GeckoDriver. However, this is highly experimental and the testsuite may not work as expected.

Supported version: as latest as possible (Firefox has better support for Marionette with each version released)
Driver download required: GeckoDriver
Run with: -Dbrowser=firefox -DfirefoxLegacyDriver=false -Dwebdriver.gecko.driver=path/to/geckodriver

Google Chrome

Supported version: latest stable
Driver download required: ChromeDriver which corresponds with your version of the browser
Run with: -Dbrowser=chrome -Dwebdriver.chrome.driver=path/to/chromedriver

Internet Explorer

Supported version: 11
Driver download required: Internet Explorer Driver Server; recommended version 3.5.1 32-bit
Run with: -Dbrowser=internetExplorer -Dwebdriver.ie.driver=path/to/IEDriverServer.exe

Automatic driver downloads

You can rely on automatic driver downloads which is provided by Arquillian Drone. To do so just omit the -Dwebdriver.{browser}.driver CLI argument when running the tests.

Run X.509 tests

To run the X.509 client certificate authentication tests:

mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
  -Pauth-server-wildfly \
  -Dauth.server.ssl.required \
  -Dbrowser=phantomjs \
  "-Dtest=*.x509.*"

Cluster tests

Cluster tests use 2 backend servers (Keycloak on Wildfly/EAP) and 1 frontend loadbalancer server node. Invalidation tests don't use loadbalancer. The browser usually communicates directly with the backend node1 and after doing some change here (eg. updating user), it verifies that the change is visible on node2 and user is updated here as well.

Failover tests use loadbalancer and they require the setup with the distributed infinispan caches switched to have 2 owners (default value is 1 owner). Otherwise failover won't reliably work.

The setup includes:

a mod_cluster load balancer on Wildfly
two clustered nodes of Keycloak server on Wildfly/EAP

Clustering tests require MULTICAST to be enabled on machine's loopback network interface. This can be done by running the following commands under root privileges:

route add -net 224.0.0.0 netmask 240.0.0.0 dev lo
ifconfig lo multicast

Then after build the sources, distribution and setup of clean shared database (replace command according your DB), you can use this command to setup servers:

export DB_HOST=localhost
mvn -f testsuite/integration-arquillian/servers/pom.xml \
-Pauth-server-wildfly,auth-server-cluster,jpa \
-Dsession.cache.owners=2 \
-Djdbc.mvn.groupId=mysql \
-Djdbc.mvn.version=5.1.29 \
-Djdbc.mvn.artifactId=mysql-connector-java \
-Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \
-Dkeycloak.connectionsJpa.user=keycloak \
-Dkeycloak.connectionsJpa.password=keycloak \
clean install

And then this to run the cluster tests:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
-Pauth-server-wildfly,auth-server-cluster \
-Dsession.cache.owners=2 \
-Dbackends.console.output=true \
-Dauth.server.log.check=false \
-Dfrontend.console.output=true \
-Dtest=org.keycloak.testsuite.cluster.**.*Test clean install

Cluster tests with embedded undertow

Run cluster tests from IDE

The test uses Undertow loadbalancer on http://localhost:8180 and two embedded backend Undertow servers with Keycloak on http://localhost:8181 and http://localhost:8182 . You can use any cluster test (eg. AuthenticationSessionFailoverClusterTest) and run from IDE with those system properties (replace with your DB settings):

-Dauth.server.undertow=false -Dauth.server.undertow.cluster=true -Dauth.server.cluster=true 
-Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver 
-Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dresources	 
-Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dsession.cache.owners=2

Invalidation tests (subclass of AbstractInvalidationClusterTest) don't need last two properties.

Run cluster environment from IDE

This mode is useful for develop/manual tests of clustering features. You will need to manually run keycloak backend nodes and loadbalancer.

Run KeycloakServer server1 with:

-Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dresources

and argument: -p 8181

Run KeycloakServer server2 with same parameters but argument: -p 8182
Run loadbalancer (class SimpleUndertowLoadBalancer) without arguments and system properties. Loadbalancer runs on port 8180, so you can access Keycloak on http://localhost:8180/auth

Cross-DC tests

Cross-DC tests use 2 data centers, each with one automatically started and one manually controlled backend servers, and 1 frontend loadbalancer server node that sits in front of all servers. The browser usually communicates directly with the frontent node and the test controls where the HTTP requests land by adjusting load balancer configuration (e.g. to direct the traffic to only a single DC).

For an example of a test, see org.keycloak.testsuite.crossdc.ActionTokenCrossDCTest.

The cross DC requires setting a profile specifying used cache server by specifying cache-server-infinispan or cache-server-jdg profile in maven.

Run Cross-DC Tests from Maven

a) First compile the Infinispan/JDG test server via the following command:

mvn -Pcache-server-infinispan -f testsuite/integration-arquillian -DskipTests clean install

mvn -Pcache-server-jdg -f testsuite/integration-arquillian -DskipTests clean install

b) Then in case you want to use JBoss-based containers instead of containers on Embedded Undertow run following command:

`mvn -Pauth-servers-crossdc-jboss,auth-server-wildfly -f testsuite/integration-arquillian -DskipTests clean install`

note: 'auth-server-wildfly' can be replaced by 'auth-server-eap'

By default JBoss-based containers use in-memory h2 database. It can be configured to use real DB, e.g. with following command:

mvn -Pauth-servers-crossdc-jboss,auth-server-wildfly,jpa -f testsuite/integration-arquillian -DskipTests clean install -Djdbc.mvn.groupId=org.mariadb.jdbc -Djdbc.mvn.artifactId=mariadb-java-client -Djdbc.mvn.version=2.0.3 -Dkeycloak.connectionsJpa.url=jdbc:mariadb://localhost:3306/keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsJpa.user=keycloak

c1) Then you can run the tests using the following command (adjust the test specification according to your needs) for containers on Undertow:

mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install

mvn -Pcache-server-jdg,auth-servers-crossdc-undertow -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install

c2) For JBoss-based containers:

mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install

mvn -Pcache-server-jdg,auth-servers-crossdc-jboss,auth-server-wildfly -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install

note: 'auth-server-wildfly can be replaced by auth-server-eap'

note Previous commands can be "squashed" into one. E.g.:

mvn -f testsuite/integration-arquillian clean install -Dtest=*.crossdc.* -Djdbc.mvn.groupId=org.mariadb.jdbc -Djdbc.mvn.artifactId=mariadb-java-client -Djdbc.mvn.version=2.0.3 -Dkeycloak.connectionsJpa.url=jdbc:mariadb://localhost:3306/keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsJpa.user=keycloak -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly,jpa clean install

It can be useful to add additional system property to enable logging:

-Dkeycloak.infinispan.logging.level=debug

Tests from package "manual" uses manual lifecycle for all servers, so needs to be executed manually. Also needs to be executed with real DB like MySQL. You can run them with:

mvn -Pcache-server-infinispan -Dtest=*.crossdc.manual.* -Dmanual.mode=true \
-Dkeycloak.connectionsJpa.url.crossdc=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver.crossdc=com.mysql.jdbc.Driver \
-Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak \
-pl testsuite/integration-arquillian/tests/base test

Run Cross-DC Tests from Intellij IDEA

First we will manually download, configure and run infinispan server. Then we can run the tests from IDE against 1 server. It's more effective during development as there is no need to restart infinispan server(s) among test runs.

Download infinispan server 8.2.X from http://infinispan.org/download/

Edit ISPN_SERVER_HOME/standalone/configuration/standalone.xml and add these local-caches to the section under cache-container local :

<cache-container name="local" ...

 ...

 <local-cache-configuration name="sessions-cfg" start="EAGER" batching="false">
     <transaction mode="NON_XA" locking="PESSIMISTIC"/>
 </local-cache-configuration>

 <local-cache name="sessions" configuration="sessions-cfg" />	
 <local-cache name="offlineSessions" configuration="sessions-cfg" />	
 <local-cache name="loginFailures" configuration="sessions-cfg" />	
 <local-cache name="actionTokens" configuration="sessions-cfg" />	
 <local-cache name="work" configuration="sessions-cfg" />

Run the server through ./standalone.sh
Setup MySQL database or some other shared database.
Ensure that org.wildfly.arquillian:wildfly-arquillian-container-managed is on the classpath when running test. On Intellij, it can be done by going to: View -> Tool Windows -> Maven projects. Then check profile "cache-server-infinispan". The tests will use this profile when executed.
Run the LoginCrossDCTest (or any other test) with those properties. In shortcut, it's using MySQL database, disabled L1 lifespan and connects to the remoteStore provided by infinispan server configured in previous steps:

-Dauth.server.crossdc=true -Dauth.server.undertow.crossdc=true -Dcache.server.lifecycle.skip=true -Dkeycloak.connectionsJpa.url.crossdc=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver.crossdc=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.l1Lifespan=0 -Dkeycloak.connectionsInfinispan.remoteStorePort=11222 -Dkeycloak.connectionsInfinispan.remoteStorePort.2=11222 -Dkeycloak.connectionsInfinispan.sessionsOwners=1 -Dsession.cache.owners=1 -Dkeycloak.infinispan.logging.level=debug -Dresources

NOTE: Tests from package "manual" (eg. SessionsPreloadCrossDCTest) needs to be executed with managed containers. So skip steps 1,2 and add property -Dmanual.mode=true and change "cache.server.lifecycle.skip" to false -Dcache.server.lifecycle.skip=false or remove it.

If you want to debug and test manually, the servers are running on these ports (Note that not all backend servers are running by default and some might be also unused by loadbalancer):

Loadbalancer -> "http://localhost:8180/auth" auth-server-undertow-cross-dc-0_1 -> "http://localhost:8101/auth" auth-server-undertow-cross-dc-0_2-manual -> "http://localhost:8102/auth" auth-server-undertow-cross-dc-1_1 -> "http://localhost:8111/auth" auth-server-undertow-cross-dc-1_2-manual -> "http://localhost:8112/auth"

Run Docker Authentication test

First, validate that your machine has a valid docker installation and that it is available to the JVM running the test. The exact steps to configure Docker depend on the operating system.

By default, the test will run against Undertow based embedded Keycloak Server, thus no distribution build is required beforehand. The exact command line arguments depend on the operating system.

General guidelines

If docker daemon doesn't run locally, or if you're not running on Linux, you may need to determine the IP of the bridge interface or local interface that Docker daemon can use to connect to Keycloak Server. Then specify that IP as additional system property called host.ip, for example:

-Dhost.ip=192.168.64.1

If using Docker for Mac, you can create an alias for your local network interface:

sudo ifconfig lo0 alias 10.200.10.1/24

Then pass the IP as host.ip:

-Dhost.ip=10.200.10.1

If you're running a Docker fork that always lists a host component of an image on docker images (e.g. Fedora / RHEL Docker) use -Ddocker.io-prefix-explicit=true argument when running the test.

Fedora

On Fedora one way to set up Docker server is the following:

# install docker
sudo dnf install docker

# configure docker
# remove --selinux-enabled from OPTIONS
sudo vi /etc/sysconfig/docker

# create docker group and add your user (so docker wouldn't need root permissions)
sudo groupadd docker && sudo gpasswd -a ${USER} docker && sudo systemctl restart docker
newgrp docker

# you need to login again after this


# make sure Docker is available
docker pull registry:2

You may also need to add an iptables rule to allow container to host traffic

sudo iptables -I INPUT -i docker0 -j ACCEPT

Then, run the test passing -Ddocker.io-prefix-explicit=true:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    clean test \
    -Dtest=DockerClientTest \
    -Dkeycloak.profile.feature.docker=enabled \
    -Ddocker.io-prefix-explicit=true

macOS

On macOS all you need to do is install Docker for Mac, start it up, and check that it works:

# make sure Docker is available
docker pull registry:2

Be especially careful to restart Docker server after every sleep / suspend to ensure system clock of Docker VM is synchronized with that of the host operating system - Docker for Mac runs inside a VM.

Then, run the test passing -Dhost.ip=IP where IP corresponds to en0 interface or an alias for localhost:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    clean test \
    -Dtest=DockerClientTest \
    -Dkeycloak.profile.feature.docker=enabled \
    -Dhost.ip=10.200.10.1

Running Docker test against Keycloak Server distribution

Make sure to build the distribution:

mvn clean install -f distribution

Then, before running the test, setup Keycloak Server distribution for the tests:

mvn -f testsuite/integration-arquillian/servers/pom.xml \
    clean install \
    -Pauth-server-wildfly

When running the test, add the following arguments to the command line:

-Pauth-server-wildfly -Pauth-server-enable-disable-feature -Dfeature.name=docker -Dfeature.value=enabled

29 KiB Raw Blame History