155 lines
9.1 KiB
Markdown
155 lines
9.1 KiB
Markdown
FIPS 140-2 Integration
|
|
======================
|
|
|
|
Environment
|
|
-----------
|
|
All the steps below were tested on RHEL 8.6 with FIPS mode enabled (See [this page](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/security_hardening/assembly_installing-a-rhel-8-system-with-fips-mode-enabled_security-hardening#doc-wrapper)
|
|
for the details) and with OpenJDK 17.0.5 on that host.
|
|
|
|
Run the server with FIPS
|
|
------------------------
|
|
|
|
To run Keycloak quarkus distribution, on the FIPS enabled host and FIPS enabled OpenJDK, you need to:
|
|
- Make sure that Keycloak will use the BouncyCastle FIPS dependencies instead of the normal BouncyCastle dependencies
|
|
- Make sure to start the server with the FIPS mode.
|
|
|
|
1) Copy BCFIPS dependencies to your Keycloak distribution.
|
|
You can either download them from BouncyCastle page and add it manually to the directory `KEYCLOAK_HOME/providers`(make sure to
|
|
use proper versions compatible with BouncyCastle Keycloak dependencies).
|
|
|
|
Or you can use for example commands like this to copy the appropriate BCFIPS jars to the Keycloak distribution. Again, replace
|
|
the BCFIPS versions with the appropriate versions from pom.xml. Assumption is that you have already these BCFIPS in
|
|
your local maven repository, which can be achieved for example by building `crypto/fips1402` module (See the section for
|
|
running the unit tests below):
|
|
|
|
```
|
|
cd $KEYCLOAK_HOME/bin
|
|
export MAVEN_REPO_HOME=$HOME/.m2/repository
|
|
export BCFIPS_VERSION=1.0.2.3
|
|
export BCTLSFIPS_VERSION=1.0.14
|
|
export BCPKIXFIPS_VERSION=1.0.7
|
|
cp $MAVEN_REPO_HOME/org/bouncycastle/bc-fips/$BCFIPS_VERSION/bc-fips-$BCFIPS_VERSION.jar ../providers/
|
|
cp $MAVEN_REPO_HOME/org/bouncycastle/bctls-fips/$BCTLSFIPS_VERSION/bctls-fips-$BCTLSFIPS_VERSION.jar ../providers/
|
|
cp $MAVEN_REPO_HOME/org/bouncycastle/bcpkix-fips/$BCPKIXFIPS_VERSION/bcpkix-fips-$BCPKIXFIPS_VERSION.jar ../providers/
|
|
```
|
|
|
|
2) Now create either pkcs12 or bcfks keystore. The pkcs12 works just in BCFIPS non-approved mode.
|
|
|
|
Please choose either `bcfips` or `pkcs12` and use the appropriate value of `KEYSTORE_FILE` variable according to your choice:
|
|
|
|
Also make sure to set `KEYCLOAK_SOURCES` to the location with your Keycloak codebase.
|
|
|
|
Note that for keystore generation, it is needed to use the BouncyCastle FIPS libraries and use custom security file, which
|
|
will remove default SUN and SunPKCS11 providers as it doesn't work to create keystore with them on FIPS enabled OpenJDK11 due
|
|
the limitation described here https://access.redhat.com/solutions/6954451 and in the related bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=2048582.
|
|
```
|
|
export KEYSTORE_FILE=keycloak-server.p12
|
|
#export KEYSTORE_FILE=keycloak-server.bcfks
|
|
export KEYCLOAK_SOURCES=$HOME/IdeaProjects/keycloak
|
|
|
|
export KEYSTORE_FORMAT=$(echo $KEYSTORE_FILE | cut -d. -f2)
|
|
if [ "$KEYSTORE_FORMAT" == "p12" ]; then
|
|
export KEYSTORE_FORMAT=pkcs12;
|
|
fi;
|
|
|
|
# Removing old keystore file to start from fresh
|
|
rm keycloak-server.p12
|
|
rm keycloak-server.bcfks
|
|
|
|
keytool -keystore $KEYSTORE_FILE \
|
|
-storetype $KEYSTORE_FORMAT \
|
|
-providername BCFIPS \
|
|
-providerclass org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider \
|
|
-provider org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider \
|
|
-providerpath $MAVEN_REPO_HOME/org/bouncycastle/bc-fips/1.0.2.3/bc-fips-1.0.2.3.jar \
|
|
-alias localhost \
|
|
-genkeypair -sigalg SHA512withRSA -keyalg RSA -storepass passwordpassword \
|
|
-dname CN=localhost -keypass passwordpassword \
|
|
-J-Djava.security.properties=$KEYCLOAK_SOURCES/testsuite/integration-arquillian/servers/auth-server/common/fips/kc.keystore-create.java.security
|
|
```
|
|
|
|
3) Run "build" to re-augment with `enabled` fips mode and start the server. This will run the server with BCFIPS in non-approved mode
|
|
|
|
```
|
|
./kc.sh start --fips-mode=enabled --hostname=localhost \
|
|
--https-key-store-file=$PWD/$KEYSTORE_FILE \
|
|
--https-key-store-type=$KEYSTORE_FORMAT \
|
|
--https-key-store-password=passwordpassword \
|
|
--log-level=INFO,org.keycloak.common.crypto:TRACE,org.keycloak.crypto:TRACE
|
|
```
|
|
|
|
4) For the `fips-mode` option, the more secure alternative is to use `--fips-mode=strict` in which case BouncyCastle FIPS will use "approved mode",
|
|
which means even stricter security requirements on cryptography and security algorithms. Few more points:
|
|
- As mentioned above, strict mode won't work with `pkcs12` keystore. So it is needed to use other keystore (probably `bcfks`).
|
|
- User passwords must be 14 characters or longer. Keycloak uses PBKDF2 based password encoding by default. BCFIPS approved mode requires passwords to be at least 112 bits
|
|
- (effectively 14 characters). If you want to allow shorter password, you need to set property `max-padding-length` of
|
|
provider `pbkdf2-sha256` of SPI `password-hashing` to value 14, so there will be some additional padding used when verifying hash created by this algorithm.
|
|
This is also backwards compatible with previously stored passwords (if you had your user's DB in non-FIPS environment and you have shorter passwords and you
|
|
want to verify them now with Keycloak using BCFIPS in approved mode, it should work fine). So effectively, you can use option like this when starting the server:
|
|
```
|
|
--spi-password-hashing-pbkdf2-sha256-max-padding-length=14
|
|
```
|
|
- RSA keys of 1024 bits don't work (2048 is the minimum). This applies for keys used by Keycloak realm itself (Realm keys from the `Keys` tab), but also client keys and IDP keys
|
|
- HMAC SHA-XXX keys must be at least 112 bits (or 14 characters long). For example if you use OIDC clients with the client
|
|
authentication `Signed Jwt with Client Secret` (aka `client-secret-jwt`), then your client secrets should be at least 14 characters long.
|
|
But anyway, it is recommended to use client secrets generated by Keycloak server, which always matches this requirement.
|
|
- Also `jks` and `pkcs12` keystores/trustores are not supported.
|
|
|
|
When starting server at startup, you can check that startup log contains `KC` provider contains KC provider with the note about `Approved Mode` like this:
|
|
```
|
|
KC(BCFIPS version 1.000203 Approved Mode) version 1.0 - class org.keycloak.crypto.fips.KeycloakFipsSecurityProvider,
|
|
```
|
|
|
|
Other considerations
|
|
--------------------
|
|
#### SAML and Kerberos
|
|
In order to have SAML working, there is a need to have `XMLDSig` security provider to be available in your `JAVA_HOME/conf/security/java.security`.
|
|
In order to have Kerberos working, there is a need to have `SunJGSS` security provider available. In FIPS enabled RHEL 8.6 in OpenJDK 17.0.5, these
|
|
security providers are not by default in the `java.security`, which means that they effectively cannot work.
|
|
|
|
To have SAML working, you can manually add the provider into `java.security` into the list fips providers. For example add the line like:
|
|
```
|
|
fips.provider.7=XMLDSig
|
|
```
|
|
Adding this security provider should be fine as in fact it is FIPS compliant and likely will be added by default in the future OpenJDK micro version.
|
|
Details: https://bugzilla.redhat.com/show_bug.cgi?id=1940064
|
|
|
|
For Kerberos, there are few more things to be done to have security provider FIPS compliant. Hence it is not recommended to add security provider
|
|
if you want to be FIPS compliant. The `KERBEROS` feature is disabled by default in Keycloak when it is executed on this platform and when security provider is not
|
|
available. Details: https://bugzilla.redhat.com/show_bug.cgi?id=2051628
|
|
|
|
Run the CLI on the FIPS host
|
|
----------------------------
|
|
In case you want to run Client Registration CLI (`kcreg.sh/bat` script) or Admin CLI (`kcadm.sh/bat` script), it is needed
|
|
that CLI will also use the BouncyCastle FIPS dependencies instead of plain BouncyCastle dependencies. To achieve this, you may copy the
|
|
jars to the CLI library folder and that is enough. CLI tool will automatically use BCFIPS dependencies instead of plain BC when
|
|
it detects that corresponding BCFIPS jars are present (see above for the versions used):
|
|
```
|
|
cp $MAVEN_REPO_HOME/org/bouncycastle/bc-fips/$BCFIPS_VERSION/bc-fips-$BCFIPS_VERSION.jar ../bin/client/lib/
|
|
cp $MAVEN_REPO_HOME/org/bouncycastle/bctls-fips/$BCTLSFIPS_VERSION/bctls-fips-$BCTLSFIPS_VERSION.jar ../bin/client/lib/
|
|
```
|
|
|
|
Run the unit tests in the FIPS environment
|
|
------------------------------------------
|
|
This instruction is about running automated tests on the FIPS enabled RHEL 8.6 system with the FIPS enabled OpenJDK 11.
|
|
|
|
So far only the unit tests inside the `crypto` module are supported. More effort is needed to have whole testsuite passing.
|
|
|
|
First it is needed to build the project (See above). Then run the tests in the `crypto` module.
|
|
```
|
|
mvn clean install -f common -DskipTests=true
|
|
mvn clean install -f core -DskipTests=true
|
|
mvn clean install -f server-spi -DskipTests=true
|
|
mvn clean install -f server-spi-private -DskipTests=true
|
|
mvn clean install -f services -DskipTests=true
|
|
mvn clean install -f crypto/fips1402
|
|
```
|
|
|
|
The tests should work also with the BouncyCastle approved mode, which is more strict in the used crypto algorithms
|
|
```
|
|
mvn clean install -f crypto/fips1402 -Dorg.bouncycastle.fips.approved_only=true
|
|
```
|
|
|
|
Run the integration tests in the FIPS environment
|
|
-------------------------------------------------
|
|
See the FIPS section in the [HOW-TO-RUN.md](../testsuite/integration-arquillian/HOW-TO-RUN.md)
|