mposolda 79fa6bb3c9 Initial support for running testsuite in BCFIPS approved mode

Closes #16429

2023-01-13 02:59:06 -08:00

47 KiB

Raw Blame History

How To Run various testsuite configurations

Base steps

It's recommended to build the workspace including distribution.

cd $KEYCLOAK_SOURCES
mvn clean install -DskipTests=true
cd distribution
mvn clean install

Running tests in the development mode (Keycloak on embedded undertow)

After build sources and distribution, it is possible to run the base testsuite

mvn -f testsuite/integration-arquillian/pom.xml clean install

Running single test can be achieved for example like this

mvn -f testsuite/integration-arquillian/pom.xml clean install -Dtest=LoginTest

By default, the development setup is used with the Keycloak server deployed on embedded undertow server. That setup doesn't even require to build the distribution or re-build the distribution after doing changes in the code.

For example when you do some fix in some class in the services module, you can re-build just that module

mvn -f services/pom.xml clean install

And then re-run the LoginTest (or any other test you wish) and the changes should be applied when running the tests.

If you use Intellij Idea, you don't even need to re-build anything with the maven. After doing any change in the codebase, the change is immediately effective when running the test with Junit runner.

Running tests in the production mode (Keycloak on Quarkus)

For the "production" testing, it is possible to run the Keycloak server deployed on real Quarkus server. This can be achieved by add the auth-server-quarkus profile when running the testsuite.

mvn -f testsuite/integration-arquillian/pom.xml -Pauth-server-quarkus clean install

Unlike the "development" setup described above, this requires re-build the whole distribution after doing any change in the code.

Debugging - tips & tricks

Arquillian debugging

Adding this system property when running any test:

-Darquillian.debug=true

will add lots of info to the log. Especially about:

The test method names, which will be executed for each test class, will be written at the proper running order to the log at the beginning of each test class(done by KcArquillian class).
All the triggered arquillian lifecycle events and executed observers listening to those events will be written to the log
The bootstrap of WebDriver will be unlimited. By default there is just 1 minute timeout and test is cancelled when WebDriver is not bootstrapped within it.

WebDriver timeout

By default, WebDriver has 10 seconds timeout to load every page and it timeouts with error after that. Use this to increase timeout to 1 hour instead:

-Dpageload.timeout=3600000

Surefire debugging

For debugging, the best is to run the test from IDE and debug it directly. When you use embedded Undertow (which is by default), then JUnit test, Keycloak server and adapter are all in the same JVM and you can debug them easily. If it is not an option and you are forced to test with Maven and Wildfly (or EAP), you can use this:

-Dmaven.surefire.debug=true

Or slightly longer version (that allows you to specify debugging port as well as wait till you attach the debugger):

-Dmaven.surefire.debug="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=5006 -Xnoagent -Djava.compiler=NONE"

and you will be able to attach remote debugger to the test. Unfortunately server and adapter are running in different JVMs, so this won't help to debug those.

Auth server debugging

See below in the "Quarkus" section.

JBoss app server debugging

Analogically, there is the same behaviour for JBoss based app server as for auth server. The default port is set to 5006. There are app server properties.

-Dapp.server.debug.port=$PORT
-Dapp.server.debug.suspend=y

When you are debugging cluster adapter tests (For example OIDCAdapterClusterTest) you may use ports 7901 and 7902 for the app server nodes. Tests are usually using 2 cluster adapter nodes.

Testsuite logging

It is configured in testsuite/integration-arquillian/tests/base/src/test/resources/log4j.properties . You can see that logging of testsuite itself (category org.keycloak.testsuite) is debug by default.

When you run tests with undertow (which is by default), there is logging for Keycloak server and adapter (category org.keycloak ) in info when you run tests from IDE, but off when you run tests with maven. The reason is that, we don't want huge logs when running mvn build. However using system property keycloak.logging.level will override it. This can be used for both IDE or maven. So for example using -Dkeycloak.logging.level=debug will enable debug logging for keycloak server and adapter.

For more fine-tuning of individual categories, you can look at log4j.properties file and temporarily enable/disable them here.

Wildfly server logging

When using Keycloak on Wildfly/EAP, there is INFO logging level enabled by default for most of the java packages. You can use those system properties to enable DEBUG logging for particular packages:

-Dinfinispan.logging.level=DEBUG - for package org.infinispan
-Dorg.keycloak.services.scheduled=DEBUG - for package org.keycloak.services.scheduled

You can use value TRACE if you want to enable even TRACE logging.

There is no support for more packages ATM, you need to edit the file testsuite/integration-arquillian/servers/auth-server/jboss/common/jboss-cli/add-log-level.cli and add packages manually.

Run adapter tests

Undertow

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    -Dtest=org.keycloak.testsuite.adapter.**.*Test

Jetty

At the moment we can run the testsuite with Jetty 9.4. Each version has its corresponding profile:

Jetty 9.4: app-server-jetty94

Here's how to run the tests with Jetty 9.4:

mvn -f testsuite/integration-arquillian/pom.xml \
    -Papp-server-jetty94 \
    -Dtest=org.keycloak.testsuite.adapter.**.*Test

Wildfly

# Run tests
mvn -f testsuite/integration-arquillian/pom.xml \
   clean install \
   -Papp-server-wildfly \
   -Dtest=org.keycloak.testsuite.adapter.**

Tomcat

We run testsuite with Tomcat 7, 8 and 9. For specific versions see properties ${tomcat[7,8,9].version} in parent pom.xml.

To run tests on Tomcat:

mvn -f testsuite/integration-arquillian/pom.xml \
       clean install \
       -Papp-server-tomcat[7,8,9] \
       -Dtest=org.keycloak.testsuite.adapter.**

Migration test

DB migration test

This test will:

start MariaDB on docker container. Docker/Podman on your laptop is a requirement for this test.
start Keycloak 17.0.0 (replace with the other version if needed)
import realm and add some data to MariaDB
stop Keycloak 17.0.0
start latest Keycloak, which automatically updates DB from 17.0.0
Perform a couple of tests to verify data after the update are correct
Stop MariaDB docker container. In case of a test failure, the MariaDB container is not stopped, so you can manually inspect the database.

The first version of Keycloak on Quarkus is version 17.0.0. Therefore, it is not possible to define the older version. You can execute those tests as follows:

export OLD_KEYCLOAK_VERSION=17.0.0

mvn -B -f testsuite/integration-arquillian/pom.xml \
  clean install \
  -Pjpa,auth-server-quarkus,db-mariadb,auth-server-migration \
  -Dtest=MigrationTest \
  -Dmigration.mode=auto \
  -Dmigrated.auth.server.version=$OLD_KEYCLOAK_VERSION \
  -Dprevious.product.unpacked.folder.name=keycloak-$OLD_KEYCLOAK_VERSION \
  -Dmigration.import.file.name=migration-realm-$OLD_KEYCLOAK_VERSION.json \
  -Dauth.server.ssl.required=false \
  -Djdbc.mvn.version=2.2.4 \
  -Dsurefire.failIfNoSpecifiedTests=false

For the available versions of old keycloak server, you can take a look to this directory .

DB migration test with manual mode

Same test as above, but it uses manual migration mode. During startup of the new Keycloak server, Liquibase won't automatically perform DB update, but it just exports the needed SQL into the script. This SQL script then needs to be manually executed against the DB. Then there is another startup of the new Keycloak server against the DB, which already has SQL changes applied and the same test as in auto mode (MigrationTest) is executed to test that data are correct.

The test is executed in same way as the "auto" DB migration test with the only difference that you need to use property migration.mode with the value manual .

-Dmigration.mode=manual

Old Admin Console UI tests

The UI tests are real-life, UI focused integration tests. Hence they do not support the default HtmlUnit browser. Only the following real-life browsers are supported: Mozilla Firefox and Google Chrome. For details on how to run the tests with these browsers, please refer to Different Browsers chapter.

The UI tests are focused on the Admin Console. They are placed in the old-admin-console module and are disabled by default.

The tests also use some constants placed in test-constants.properties. A different file can be specified by -Dtestsuite.constants=path/to/different-test-constants.properties

In case a custom settings.xml is used for Maven, you need to specify it also in -Dkie.maven.settings.custom=path/to/settings.xml.

Execution example

mvn -f testsuite/integration-arquillian/tests/other/old-admin-console/pom.xml \
    clean test \
    -Dbrowser=firefox \
    -Dfirefox_binary=/opt/firefox-45.1.1esr/firefox

Spring Boot adapter tests

Currently, we are testing Spring Boot with three different containers Tomcat 8, Undertow and Jetty 9.4. We are testing various versions of Spring Boot 2.x. All versions are specified in root pom.xml (i.e. see properties spring-boot24.version and spring-boot26.version). To run tests execute following command. Default version of Spring Boot is 2.4.x, to run tests with version 2.6.x add profile -Pspringboot26.

mvn -f testsuite/integration-arquillian/tests/other/springboot-tests/pom.xml \
    clean test \
    -Dadapter.container=[tomcat|undertow|jetty94] \
    [-Pspringboot26]

Base UI tests

Similarly to Admin Console tests, these tests are focused on UI, specifically on the parts of the server that are accessed by an end user (like Login page, or Account Console). They are designed to work with mobile browsers (alongside the standard desktop browsers). For details on the supported browsers and their configuration please refer to Different Browsers chapter.

Execution example

mvn -f testsuite/integration-arquillian/tests/other/base-ui/pom.xml \
    clean test \
    -Pandroid \
    -Dappium.avd=Nexus_5X_API_27

Disabling features

Some features in Keycloak can be disabled. To run the testsuite with a specific feature disabled use the auth.server.feature system property. For example to run the tests with authorization disabled run:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml clean test -Pauth-server-wildfly -Dauth.server.feature=-Dkeycloak.profile.feature.authorization=disabled

WebAuthN tests

These tests cover feature W3C WebAuthn, which provides us a lot of possibilities how to include 2FA or MFA to our authentication flows. For testing the feature, it's necessary to use various devices, which support WebAuthn. However, we are not able to physically test those devices as in a real world, but we create a virtual authenticators, which should behave the same. The support for the Virtual Authenticators came from Selenium 4.

Run all WebAuthN tests

mvn -f testsuite/integration-arquillian/tests/other/pom.xml clean test \
    -Dbrowser=chrome -Pwebauthn

Note: You can also execute those tests with chromeHeadless browser in order to not open a new window.

Troubleshooting

If you try to run WebAuthn tests with Chrome browser and you see error like:

Caused by: java.lang.RuntimeException: Unable to instantiate Drone via org.openqa.selenium.chrome.ChromeDriver(Capabilities):
  org.openqa.selenium.SessionNotCreatedException: session not created: This version of ChromeDriver only supports Chrome version 78

It could be because version of your locally installed chrome browser is not compatible with the version of chrome driver. Check what is the version of your chrome browser (You can open URL chrome://version/ for the details) and then check available versions from the https://chromedriver.chromium.org/downloads . Then run the WebAuthn tests as above with the additional system property for specifying version of your chrome driver. For example:

-DchromeDriverVersion=77.0.3865.40

For Windows: Probably, you encounter issues with execution those tests on the Windows platform due to Chrome Driver is not available. In this case, please define the path to the local Chrome Driver by adding this property -Dwebdriver.chrome.driver=C:/path/to/chromedriver.exe.

Warning: Please, be aware the WebAuthn tests are still in a development phase and there is a high chance those tests will not be stable.

The social login tests require setup of all social networks including an example social user. These details can't be shared as it would result in the clients and users eventually being blocked. By default these tests are skipped.

To run the full test you need to configure clients in Google, Facebook, GitHub, Twitter, LinkedIn, Microsoft, PayPal and StackOverflow. See the server administration guide for details on how to do that. You have to use URLs like http://localhost:8180/auth/realms/social/broker/google/endpoint (with google replaced by the name of given provider) as an authorized redirect URL when configuring the client. Further, you also need to create a sample user that can login to the social network.

The details should be added to a standard properties file. For some properties you can use shared common properties and override when needed. Or you can specify these for all providers. All providers require at least clientId and clientSecret (StackOverflow also requires clientKey).

An example social.properties file looks like:

common.username=sampleuser@example.org
common.password=commonpassword
common.profile.firstName=Foo
common.profile.lastName=Bar
common.profile.email=sampleuser@example.org

google.clientId=asdfasdfasdfasdfsadf
google.clientSecret=zxcvzxcvzxcvzxcv

facebook.clientId=asdfasdfasdfasdfsadf
facebook.clientSecret=zxcvzxcvzxcvzxcv
facebook.profile.lastName=Test

In the example above the common username, password and profile are shared for all providers, but Facebook has a different last name. Profile informations are used for assertion after login, so you have to set them to be same as user profile information returned by given social login provider for used sample user.

Some providers actively block bots so you need to use a proper browser to test. Either Firefox or Chrome should work.

To run the tests run:

mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
      -Pauth-server-wildfly \
      -Dtest=SocialLoginTest \
      -Dbrowser=chrome \
      -Dsocial.config=/path/to/social.properties

To run individual social provider test only you can use option like -Dtest=SocialLoginTest#linkedinLogin

Different Browsers

You can use many different real-world browsers to run the integration tests. Although technically they can be run with almost every test in the testsuite, they can fail with some of them as the tests often require specific optimizations for given browser. Therefore, only some of the test modules have support to be run with specific browsers.

Mozilla Firefox

Supported test modules: console, base-ui
Supported version: latest stable
Driver download required: GeckoDriver
Run with: -Dbrowser=firefox -Dwebdriver.gecko.driver=path/to/geckodriver; optionally you can specify -Dfirefox_binary=path/to/firefox/binary

Google Chrome

Supported test modules: console, base-ui
Supported version: latest stable
Driver download required: ChromeDriver that corresponds with your version of the browser
Run with: -Dbrowser=chrome -Dwebdriver.chrome.driver=path/to/chromedriver

Apple Safari

Supported test modules: base-ui
Supported version: latest stable
Driver download required: no (the driver is bundled with macOS)
Run with: -Dbrowser=safari

[DEPRECATED] Mozilla Firefox with legacy driver

Supported test modules: console
Supported version: 52 ESR (Extended Support Release)
Driver download required: no
Run with: -Dbrowser=firefox -DfirefoxLegacyDriver=true -Dfirefox_binary=path/to/firefox-52-esr/binary

Automatic driver downloads

You can rely on automatic driver downloads which is provided by Arquillian Drone. To do so just omit the -Dwebdriver.{browser}.driver CLI argument when running the tests. By default latest driver version is always downloaded. To download a specific version, add -DfirefoxDriverVersion or -DchromeDriverVersion CLI argument.

Mobile browsers

The support for testing with the mobile browsers is implemented using the Appium project. This means the tests can be run with a real mobile browser in a real mobile OS. However, only emulators/simulators of mobile devices are supported at the moment (no physical devices) in our testsuite.

First, you need to install the Appium server. If you have Node.js and npm installed on your machine, you can do that with: npm install -g appium. For further details and requirements please refer to the official Appium documentation. The tests will try to start the Appium server automatically but you can do it manually as well (just by executing appium).

To use a mobile browser you need to create a virtual device. The most convenient way to do so is to install the desired platform's IDE - either Android Studio (for Android devices) or Xcode (for iOS devices) - then you can create a device (smartphone/tablet) there. For details please refer to documentation of those IDEs.

Google Chrome on Android

Supported test modules: base-ui
Supported host OS: Windows, Linux, macOS
Supported browser version: latest stable
Supported mobile OS version: Android 7.x, 8.x
Run with: mvn clean test -Pandroid -Dappium.avd=name_of_the_AVD where AVD is the name of your Android Virtual Device (e.g. Nexus_5X_API_27)

Tips & tricks:

If the AVD name contains any spaces, you need to replace them with underscores when specifying the -Dappium.avd=....
It's probable that a freshly created device will contain an outdated Chrome version. To update to the latest version (without using the Play Store) you need to download an .apk for Chrome and install it with adb install -r path/to/chrome.apk.
Chrome on Android uses ChromeDriver similarly to regular desktop Chrome. The ChromeDriver is bundled with the Appium server. To use a newer ChromeDriver please follow the Appium documentation.

Apple Safari on iOS

Supported test modules: base-ui
Supported host OS: macOS
Supported browser version: depends on the mobile OS version
Supported mobile OS version: iOS 11.x
Run with: mvn clean test -Pios -Dappium.deviceName=device_name where the device name is your device identification (e.g. iPhone X)

Disabling TLS (SSL) in the tests

All tests are executed with TLS by default. In order to disable it, you need to switch the auth.server.ssl.required property off. Here's an example:

mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
  -Dauth.server.ssl.required=false

NOTE: You can also do it ad-hoc from your IDE, however some tests (like AuthZ or JS Adapter tests) require rebuilt test applications. so please make sure you rebuild all testsuite/integration-arquillian child modules.

Cluster tests

Cluster tests use 2 backend servers (Keycloak on Wildfly/EAP or Keycloak on Undertow), 1 frontend loadbalancer server node and one shared DB. Invalidation tests don't use loadbalancer. The browser usually communicates directly with the backend node1 and after doing some change here (eg. updating user), it verifies that the change is visible on node2 and user is updated here as well.

Failover tests use loadbalancer and they require the setup with the distributed infinispan caches switched to have 2 owners (default value is 1 owner). Otherwise failover won't reliably work.

The setup includes:

a load balancer on embedded Undertow (SimpleUndertowLoadBalancer)
two clustered nodes of Keycloak server on Wildfly/EAP or on embedded undertow
shared DB

Cluster tests with Keycloak on Quarkus

Make sure the testsuite/integration-arquillian/servers/auth-server/quarkus module was built as follows:

mvn -f testsuite/integration-arquillian/servers/auth-server/quarkus/pom.xml clean install \
     -Pauth-server-cluster-quarkus

Run tests using the auth-server-cluster-quarkus profile:

 mvn -f testsuite/integration-arquillian/tests/base/pom.xml clean install \
 -Pauth-server-cluster-quarkus \
 -Dsession.cache.owners=2  \
 -Dtest=AuthenticationSessionFailoverClusterTest

Alternatively, you can perform both steps using the following command:

mvn -f testsuite/integration-arquillian/pom.xml clean install \
-Pauth-server-cluster-quarkus \
-Dsession.cache.owners=2 \
-Dtest=AuthenticationSessionFailoverClusterTest

NOTE

Right now, tests are using a H2 database.

To run tests using a different database such as PostgreSQL, add the following properties into the testsuite/integration-arquillian/servers/auth-server/quarkus/src/main/content/conf/keycloak.conf configuration file:

# HA using PostgreSQL
%ha.datasource.dialect=org.hibernate.dialect.PostgreSQL9Dialect
%ha.datasource.driver = org.postgresql.xa.PGXADataSource
%ha.datasource.url = jdbc:postgresql://localhost/keycloak
%ha.datasource.username = keycloak
%ha.datasource.password = password

The ha profile is automatically set when running clustering tests.

This is temporary and database configuration should be more integrated with the test suite once we review Quarkus configuration.

Run cluster tests from IDE on Quarkus

Activate the following profiles:

quarkus
auth-server-cluster-quarkus

Then run any cluster test as usual.

Cluster tests with Keycloak on embedded undertow

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
-Pauth-server-cluster-undertow,db-mysql \
-Dsession.cache.owners=2 \
-Dkeycloak.connectionsInfinispan.sessionsOwners=2 \
-Dbackends.console.output=true \
-Dauth.server.log.check=false \
-Dfrontend.console.output=true \
-Dtest=org.keycloak.testsuite.cluster.**.*Test clean install

Note that after update, you might encounter org.infinispan.commons.CacheException: Initial state transfer timed out for cache org.infinispan.CONFIG error in some environments. This can be fixed by adding -Djava.net.preferIPv4Stack=true parameter to the command above.

Run cluster tests from IDE on embedded undertow

The test uses Undertow loadbalancer on http://localhost:8180 and two embedded backend Undertow servers with Keycloak on http://localhost:8181 and http://localhost:8182 . You can use any cluster test (eg. AuthenticationSessionFailoverClusterTest) and run from IDE with those system properties (replace with your DB settings):

-Dauth.server.undertow=false -Dauth.server.undertow.cluster=true -Dauth.server.cluster=true
-Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver
-Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dresources
-Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dsession.cache.owners=2

Invalidation tests (subclass of AbstractInvalidationClusterTest) don't need last two properties.

Run cluster environment from IDE

This mode is useful for develop/manual tests of clustering features. You will need to manually run keycloak backend nodes and loadbalancer.

Run KeycloakServer server1 with:

-Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dresources

and argument: -p 8181

Run KeycloakServer server2 with same parameters but argument: -p 8182
Run loadbalancer (class SimpleUndertowLoadBalancer) without arguments and system properties. Loadbalancer runs on port 8180, so you can access Keycloak on http://localhost:8180/auth

Cross-DC tests

Cross-DC tests use 2 data centers, each with one automatically started and one manually controlled backend servers, and 1 frontend loadbalancer server node that sits in front of all servers. The browser usually communicates directly with the frontent node and the test controls where the HTTP requests land by adjusting load balancer configuration (e.g. to direct the traffic to only a single DC).

For an example of a test, see org.keycloak.testsuite.crossdc.ActionTokenCrossDCTest.

The cross DC requires setting a profile specifying the used cache server. Use cache-server-infinispan Maven profile for Infinispan 10 or higher, or cache-server-legacy-infinispan profile for Infinispan 9 and lower. Use cache-server-datagrid Maven profile for Datagrid 8 or higher, or cache-server-legacy-datagrid profile for Datagrid 7 and lower.

To specify a custom Java platform to run the cache server it is possible to set parameter: -Dcache.server.java.home=<PATH_TO_JDK>.

Cache Authentication

With WildFLy/EAP based auth server option it is possible to enable authentication for the HotRod protocol by enabling profile cache-auth.

It is possible to specify additional parameters:

-Dhotrod.sasl.mechanism: SASL mechanism used by the hotrod protocol. Default value is DIGEST-MD5.
-Dkeycloak.connectionsInfinispan.hotrodProtocolVersion: Version of the hotrod protocol.

Example: -Pauth-server-wildfly,cache-server-infinispan,cache-auth -Dhotrod.sasl.mechanism=SCRAM-SHA-512

Note: The cache authentication is not implemented for SAMLAdapterCrossDCTest.

Note: The cache-auth profile currently doesn't work with the legacy Infinispan/Datagrid modules. See: KEYCLOAK-18336.

Data Grid

Since Datagrid does not distribute infinispan-server zip artifact, for cache-server-datagrid profile it is necessary to download the artifact and install it to local Maven repository. For Red Hat Data Grid 8 and above, the command is the following:

mvn install:install-file \
-DgroupId=com.redhat -DartifactId=datagrid -Dpackaging=zip -Dclassifier=bin -DgeneratePom=true \
-Dversion=${DATAGRID_VERSION} -Dfile=redhat-datagrid-${DATAGRID_VERSION}-server.zip

For Data Grid 7 and older use: -Dfile=jboss-datagrid-${DATAGRID_VERSION}-server.zip.

Run Cross-DC Tests from Maven

Warning: The Cross-DC tests doesn't work with Quarkus distribution

Note: Profile auth-servers-crossdc-undertow currently doesn't work (see KEYCLOAK-18335). Use -Pauth-servers-crossdc-jboss,auth-server-wildfly instead.

a) Prepare the environment. Compile the infinispan server and eventually Keycloak on JBoss server.

a1) If you want to use Undertow based Keycloak container, you just need to download and prepare the Infinispan/JDG test server via the following command:

mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -f testsuite/integration-arquillian -DskipTests clean install

note: 'cache-server-infinispan' can be replaced by 'cache-server-datagrid'

a2) If you want to use JBoss-based Keycloak backend containers instead of containers on Embedded Undertow, you need to prepare both the Infinispan/JDG test server and the Keycloak server on Wildfly/EAP. Run following command:

mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -f testsuite/integration-arquillian -DskipTests clean install

note: 'cache-server-infinispan' can be replaced by 'cache-server-datagrid'

note: 'auth-server-wildfly' can be replaced by 'auth-server-eap'

By default JBoss-based containers use TCP-based h2 database. It can be configured to use real DB spawn in Docker, e.g. with following command:

mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly,jpa,db-mariadb -f testsuite/integration-arquillian -DskipTests clean install

b1) For Undertow Keycloak backend containers, you can run the tests using the following command (adjust the test specification according to your needs):

mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -Dtest=org.keycloak.testsuite.crossdc.**.*Test -pl testsuite/integration-arquillian/tests/base clean install

note: 'cache-server-infinispan' can be replaced by 'cache-server-datagrid'

note: It can be useful to add additional system property to enable logging:

-Dkeycloak.infinispan.logging.level=debug

b2) For JBoss-based Keycloak backend containers, you can run the tests like this:

mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -Dtest=org.keycloak.testsuite.crossdc.**.*Test -pl testsuite/integration-arquillian/tests/base clean install

note: 'cache-server-infinispan' can be replaced by 'cache-server-datagrid'

note: 'auth-server-wildfly can be replaced by auth-server-eap'

note: For JBoss-based Keycloak backend containers on real DB, the previous commands from (a2) and (b2) can be "squashed" into one. E.g.:

mvn -f testsuite/integration-arquillian -Dtest=org.keycloak.testsuite.crossdc.**.*Test -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly,jpa,db-mariadb clean install

Run Cross-DC Tests from Intellij IDEA

Note: Profile auth-servers-crossdc-undertow which is required in step (3) currently doesn't work (see KEYCLOAK-18335).

First we will manually download, configure and run infinispan servers. Then we can run the tests from IDE against the servers. It's more effective during development as there is no need to restart infinispan server(s) among test runs.

Download infinispan server of corresponding version (See "infinispan.version" property in root pom.xml) from http://infinispan.org/download/ and go through the steps from the Keycloak Cross-DC documentation for setup infinispan servers.

The difference to original docs is, that you need to have JDG servers available on localhost with port offsets. So:

The TCPPING hosts should be like this:

<property name="initial_hosts">localhost[8610],localhost[9610]"</property>

The port offset when starting node jdg1 should be like: -Djboss.socket.binding.port-offset=1010 and when starting the jdg2 server, then -Djboss.socket.binding.port-offset=2010 . In both cases, the bind address should be just default localhost (In other words, the -b switch can be omitted).

So assume you have both Infinispan/JDG servers up and running.

Setup MySQL database or some other shared database.
Ensure that org.wildfly.arquillian:wildfly-arquillian-container-managed is on the classpath when running test. On Intellij, it can be done by going to: View -> Tool Windows -> Maven projects. Then check profile cache-server-infinispan and auth-servers-crossdc-undertow. The tests will use this profile when executed.
Run the LoginCrossDCTest (or any other test) with those properties. In shortcut, it's using MySQL database and connects to the remoteStore provided by infinispan server configured in previous steps:

-Dauth.server.crossdc=true -Dauth.server.undertow.crossdc=true -Dcache.server.lifecycle.skip=true -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsJpa.url.crossdc=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver.crossdc=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.remoteStorePort=12232 -Dkeycloak.connectionsInfinispan.remoteStorePort.2=13232 -Dkeycloak.connectionsInfinispan.sessionsOwners=1 -Dsession.cache.owners=1 -Dkeycloak.infinispan.logging.level=debug -Dresources

NOTE: Tests from package manual (eg. SessionsPreloadCrossDCTest) needs to be executed with managed containers. So skip steps 1,2 and add property -Dmanual.mode=true and change "cache.server.lifecycle.skip" to false -Dcache.server.lifecycle.skip=false or remove it.

If you want to debug or test manually, the servers are running on these ports (Note that not all backend servers are running by default and some might be also unused by loadbalancer):

Loadbalancer -> "http://localhost:8180/auth"
auth-server-undertow-cross-dc-0_1 -> "http://localhost:8101/auth"
auth-server-undertow-cross-dc-0_2-manual -> "http://localhost:8102/auth"
auth-server-undertow-cross-dc-1_1 -> "http://localhost:8111/auth"
auth-server-undertow-cross-dc-1_2-manual -> "http://localhost:8112/auth"

Run Docker Authentication test

First, validate that your machine has a valid docker installation and that it is available to the JVM running the test. The exact steps to configure Docker depend on the operating system.

By default, the test will run against Undertow based embedded Keycloak Server, thus no distribution build is required beforehand. The exact command line arguments depend on the operating system.

General guidelines

If docker daemon doesn't run locally, or if you're not running on Linux, you may need to determine the IP of the bridge interface or local interface that Docker daemon can use to connect to Keycloak Server. Then specify that IP as additional system property called host.ip, for example:

-Dhost.ip=192.168.64.1

If using Docker for Mac, you can create an alias for your local network interface:

sudo ifconfig lo0 alias 10.200.10.1/24

Then pass the IP as host.ip:

-Dhost.ip=10.200.10.1

If you're running a Docker fork that always lists a host component of an image on docker images (e.g. Fedora / RHEL Docker) use -Ddocker.io-prefix-explicit=true argument when running the test.

Fedora

On Fedora one way to set up Docker server is the following:

# install docker
sudo dnf install docker

# configure docker
# remove --selinux-enabled from OPTIONS
sudo vi /etc/sysconfig/docker

# create docker group and add your user (so docker wouldn't need root permissions)
sudo groupadd docker && sudo gpasswd -a ${USER} docker && sudo systemctl restart docker
newgrp docker

# you need to login again after this


# make sure Docker is available
docker pull registry:2

You may also need to add an iptables rule to allow container to host traffic

sudo iptables -I INPUT -i docker0 -j ACCEPT

Then, run the test passing -Ddocker.io-prefix-explicit=true:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    clean test \
    -Dtest=DockerClientTest \
    -Dkeycloak.profile.feature.docker=enabled \
    -Ddocker.io-prefix-explicit=true

macOS

On macOS all you need to do is install Docker for Mac, start it up, and check that it works:

# make sure Docker is available
docker pull registry:2

Be especially careful to restart Docker server after every sleep / suspend to ensure system clock of Docker VM is synchronized with that of the host operating system - Docker for Mac runs inside a VM.

Then, run the test passing -Dhost.ip=IP where IP corresponds to en0 interface or an alias for localhost:

mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    clean test \
    -Dtest=DockerClientTest \
    -Dkeycloak.profile.feature.docker=enabled \
    -Dhost.ip=10.200.10.1

Running Docker test against Keycloak Server distribution

Make sure to build the distribution:

mvn clean install -f distribution

Then, before running the test, setup Keycloak Server distribution for the tests:

mvn -f testsuite/integration-arquillian/servers/pom.xml \
    clean install \
    -Pauth-server-quarkus

When running the test, add the following arguments to the command line:

-Pauth-server-quarkus -Pauth-server-enable-disable-feature -Dfeature.name=docker -Dfeature.value=enabled

Java 11 support

Java 11 requires some arguments to be passed to JVM. Those can be activated using -Pjava11-auth-server and -Pjava11-app-server profiles, respectively.

Running tests using Quarkus distribution

Before Everything

Make sure you build the project using the quarkus profile as follows:

mvn -Pdistribution,quarkus clean install

Running tests

Run tests using the auth-server-quarkus profile:

mvn -f testsuite/integration-arquillian/pom.xml clean install -Pauth-server-quarkus

Debug the Server

Right now, the server runs in a separate process. To debug the server set auth.server.debug system property to true.

To configure the debugger port, set the auth.server.debug.port system property with any valid port number. Default is 5005. Note you can also set port for example to *:5005 or my-host:5005 to set the bind host.

By default, quarkus server is started in the testsuite and you need to attach remote debugger to it during running. You can use auth.server.debug.suspend=y to "suspend" server startup when running testsuite, which means that server startup is blocked until debugger is attached.

More info: http://javahowto.blogspot.cz/2010/09/java-agentlibjdwp-for-attaching.html

Cookies testing

In order to reproduce some specific cookies behaviour in browsers (like SameSite policies or 3rd party cookie blocking), some subset of tests needs to be ran with different hosts for auth server and app/IdP server in order to simulate third party contexts. Those hosts must be different from localhost as that host has some special treatment from browsers. At the same time both hosts must use different domains to be considered cross-origin, e.g. 127.0.0.1.nip.io and 127.0.0.1.xip.io. NOT app1.127.0.0.1.nip.io and app2.127.0.0.1.nip.io!!

Also, those new cookies policies are currently not yet enabled by default (which will change in the near future). To test those policies, you need the latest stable Firefox together with firefox-strict-cookies profile. This profile sets the browser to Firefox, configures the proper cookies behavior and makes Firefox to run in the headless mode (which is ok because this is not UI testing). For debugging purposes you can override the headless mode with -DfirefoxHeadless=false.

Broker tests:

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pfirefox-strict-cookies \
                  -Dtest=**.broker.** \
                  -Dauth.server.host=[some_host] -Dauth.server.host2=[some_other_host]

JS adapter tests:

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pfirefox-strict-cookies \
                  -Dtest=**.javascript.** \
                  -Dauth.server.host=[some_host] -Dauth.server.host2=[some_other_host]

General adapter tests

mvn clean install -f testsuite/integration-arquillian/tests/base \
                   -Pfirefox-strict-cookies \
                   -Dtest=**.adapter.** \
                   -Dauth.server.host=[some_host] -Dauth.server.host2=[some_other_host]

Hostname Tests

For changing the hostname in the hostname tests (e.g. DefaultHostnameTest), we rely on nip.io for DNS switching, so tests will work everywhere without fiddling with etc/hosts locally.

Running base testsuite with Map storage

To run base testsuite with new storage run the following command (this will execute testsuite with ConcurrentHashMap storage):

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pauth-server-quarkus -Pmap-storage-chm

Running tests with JPA Map storage

By default, testing with the profile map-storage-jpa-postgres spawns a new Postgres container with each test execution. The default image used is postgres:alpine. To spawn a different version, use the system property keycloak.map.storage.postgres.docker.image.

In a similar way the profile map-storage-jpa-cockroach spawns a new CockroachDB container with each test execution. It uses the official CockroachDB image in the version stated in the class CockroachdbContainerTestEnricher. To spawn a different version, use the system property keycloak.map.storage.cockroachdb.docker.image.

Execute tests:

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pmap-storage-jpa-postgres

It's also possible to configure tests to connect to an external database, it might be useful for debugging purposes as the database is not removed after the testsuite run. On the other hand it'll require manual cleaning between two runs.

PostgreSQL database can be started e.g. by following command:

podman run --name postgres -p 5432:5432 -e POSTGRES_PASSWORD=pass -e POSTGRES_USER=keycloak -e POSTGRES_DB=keycloak -d postgres:alpine

To run the tests without spawning the container for you, execute tests with the following command:

mvn clean install -f testsuite/integration-arquillian/tests/base \
  -Pmap-storage-jpa-postgres \
  -Dpostgres.start-container=false \
  -Dkeycloak.map.storage.connectionsJpa.url=<jdbc_url> \
  -Dkeycloak.map.storage.connectionsJpa.user=<user> \
  -Dkeycloak.map.storage.connectionsJpa.password=<password>

Running tests with HotRod Map storage

By default, Base testsuite with map-storage-hotrod profile spawn a new Infinispan container with each test execution. To run the tests execute:

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pmap-storage-hotrod

Note: For running Infinispan server we are using Testcontainer, see section Usage of Testcontainers for details on how to set up your container engine.

It is also possible, to configure Base testsuite to connect to an external instance of Infinispan. To do so, execute tests with the following command:

mvn clean install -f testsuite/integration-arquillian/tests/base \
                  -Pmap-storage-hotrod
                  -Dkeycloak.testsuite.start-hotrod-container=false \
                  -Dkeycloak.connectionsHotRod.host=<host> \
                  -Dkeycloak.connectionsHotRod.port=<port> \
                  -Dkeycloak.connectionsHotRod.username=<username> \
                  -Dkeycloak.connectionsHotRod.password=<password>

Usage of Testcontainers

Some profiles within model tests require running 3rd party software, for example, database or Infinispan. For running these we are using Testcontainers. This may require some additional configuration of your container engine.

Podman settings

For more details see the following Podman guide from Quarkus webpage.

Specifically, these steps are required:

# Enable the podman socket with Docker REST API (only needs to be done once)
systemctl --user enable podman.socket --now

# Set the required environment variables (need to be run everytime or added to profile)
export DOCKER_HOST=unix:///run/user/${UID}/podman/podman.sock

Testcontainers are using ryuk to cleanup containers after tests. To make this work with Podman add the following line to ~/.testcontainers.properties

ryuk.container.privileged=true

Alternatively, disable usage of ryuk (using this may result in stale containers still running after tests finish. This is not recommended especially if you are executing tests from Intellij IDE as it may not stop the containers created during test run).

export TESTCONTAINERS_RYUK_DISABLED=true #not recommended - see above!

Docker settings

To use Testcontainers with Docker it is necessary to make Docker available for non-root users.

Tips & Tricks:

Although it should work in general, you may experience an exception like this:

java.lang.RuntimeException: java.net.UnknownHostException: keycloak.127.0.0.1.nip.io: nodename nor servname provided, 
or not known at org.keycloak.testsuite.util.OAuthClient.doWellKnownRequest(OAuthClient.java:1032)
at org.keycloak.testsuite.url.DefaultHostnameTest.assertBackendForcedToFrontendWithMatchingHostname(
DefaultHostnameTest.java:226)
...

when running these tests on your local machine. This happens when something on your machine or network is blocking DNS queries to nip.io One possible workaround is to add a commonly used public dns server (e.g. 8.8.8.8 for google dns server) to your local networks dns configuration and run the tests.

FIPS 140-2 testing

On the FIPS enabled platform with FIPS enabled OpenJDK 11, you can run this to test against Keycloak server on Quarkus with FIPS 140.2 integration enabled

mvn -B -f testsuite/integration-arquillian/pom.xml \
  clean install \
  -Pauth-server-quarkus,auth-server-fips140-2 \
  -Dcom.redhat.fips=false

NOTE 1: The property com.redhat.fips is needed so that testsuite itself is executed in the JVM with FIPS disabled. However most important part is that Keycloak itself is running on the JVM with FIPS enabled. You can check log from server startup and there should be messages similar to those:

2022-10-11 19:34:29,521 DEBUG [org.keycloak.common.crypto.CryptoIntegration] (main) Using the crypto provider: org.keycloak.crypto.fips.FIPS1402Provider
2022-10-11 19:34:31,072 TRACE [org.keycloak.common.crypto.CryptoIntegration] (main) Java security providers: [ 
 KC(BCFIPS version 1.000203) version 1.0 - class org.keycloak.crypto.fips.KeycloakFipsSecurityProvider, 
 BCFIPS version 1.000203 - class org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider, 
 BCJSSE version 1.001202 - class org.bouncycastle.jsse.provider.BouncyCastleJsseProvider,
]

BCFIPS approved mode

For running testsuite with server using BCFIPS approved mode, those additional properties should be added when running tests:

-Dauth.server.fips.mode=strict \
-Dauth.server.supported.keystore.types=BCFKS \
-Dauth.server.keystore.type=bcfks

The log should contain KeycloakFipsSecurityProvider mentioning "Approved mode". Something like:

KC(BCFIPS version 1.000203 Approved Mode) version 1.0 - class org.keycloak.crypto.fips.KeycloakFipsSecurityProvider,

47 KiB Raw Blame History

How To Run various testsuite configurations

Base steps

Running tests in the development mode (Keycloak on embedded undertow)

Running tests in the production mode (Keycloak on Quarkus)

Debugging - tips & tricks

Arquillian debugging

WebDriver timeout

Surefire debugging

Auth server debugging

JBoss app server debugging

Testsuite logging

Wildfly server logging

Run adapter tests

Undertow

Jetty

Wildfly

Tomcat

Migration test

DB migration test

DB migration test with manual mode

Old Admin Console UI tests

Execution example

Spring Boot adapter tests

Base UI tests

Execution example

Disabling features

WebAuthN tests

Run all WebAuthN tests

Troubleshooting

Social Login

Different Browsers

Mozilla Firefox

Google Chrome

Apple Safari

[DEPRECATED] Mozilla Firefox with legacy driver

Automatic driver downloads

Mobile browsers

Google Chrome on Android

Apple Safari on iOS

Disabling TLS (SSL) in the tests

Cluster tests

Cluster tests with Keycloak on Quarkus

Run cluster tests from IDE on Quarkus

Cluster tests with Keycloak on embedded undertow

Run cluster tests from IDE on embedded undertow

Run cluster environment from IDE

Cross-DC tests

Cache Authentication

Data Grid

Run Cross-DC Tests from Maven

Run Cross-DC Tests from Intellij IDEA

Run Docker Authentication test

General guidelines

Fedora

macOS

Running Docker test against Keycloak Server distribution

Java 11 support

Running tests using Quarkus distribution

Before Everything

Running tests

Debug the Server

Cookies testing

Hostname Tests

Running base testsuite with Map storage

Running tests with JPA Map storage

Running tests with HotRod Map storage

Usage of Testcontainers

Podman settings

Docker settings

Tips & Tricks:

FIPS 140-2 testing

BCFIPS approved mode

47 KiB

Raw Blame History