311 lines
13 KiB
Text
Executable file
311 lines
13 KiB
Text
Executable file
[[_domain-mode]]
|
|
=== Domain Clustered Mode
|
|
|
|
Domain mode is a way to centrally manage and publish the configuration for your servers.
|
|
|
|
Running a cluster in standard mode can quickly become aggravating as the cluster grows in size. Every time you need
|
|
to make a configuration change, you have perform it on each node in the cluster. Domain mode solves this problem by providing
|
|
a central place to store and publish configuration. It can be quite complex to set up, but it is worth it in the end.
|
|
This capability is built into the {{book.appserver.name}} Application Server which {{book.project.name}} derives from.
|
|
|
|
NOTE: The guide will go over the very basics of domain mode. Detailed steps on how to set up domain mode in a cluster should be obtained from the
|
|
link:{{book.appserver.admindoc.link}}[{{book.appserver.admindoc.name}}].
|
|
|
|
Here are some of the basic concepts of running in domain mode.
|
|
|
|
domain controller::
|
|
The domain controller is a process that is responsible for storing, managing, and publishing the general configuration
|
|
for each node in the cluster. This process is the central point from which nodes in a cluster obtain their configuration.
|
|
|
|
host controller::
|
|
The host controller is responsible for managing server instances on a specific machine. You configure it to run
|
|
one or more server instances. The domain controller can also interact with the host controllers on each machine to
|
|
manage the cluster. To reduce the number of running process, a domain controller also acts as a host controller on
|
|
the machine it runs on.
|
|
|
|
domain profile::
|
|
A domain profile is a named set of configuration that can be used by a server to boot from. A domain controller
|
|
can define multiple domain profiles that are consumed by different servers.
|
|
|
|
server group::
|
|
A server group is a collection of servers. They are managed and configured as one. You can assign a domain profile to a server group and every service in that
|
|
group will use that domain profile as their configuration.
|
|
|
|
In domain mode, a domain controller is started on a master node. The configuration for the cluster resides in the domain controller.
|
|
Next a host controller is started on each machine in the cluster. Each host controller deployment configuration specifies how
|
|
many {{book.project.name}} server instances will be started on that machine. When the host controller boots up, it starts
|
|
as many {{book.project.name}} server instances as it was configured to do. These server instances pull their configuration
|
|
from the domain controller.
|
|
|
|
==== Domain Configuration
|
|
|
|
Various other chapters in this guide walk you through configuring various aspects like databases,
|
|
HTTP network connections, caches, and other infrastructure related things. While standalone mode uses the _standalone.xml_ file to configure these things,
|
|
domain mode uses the _.../domain/domain.xml_ configuration file. This is
|
|
where the domain profile and server group for the {{book.project.name}} server are defined.
|
|
|
|
|
|
.domain.xml
|
|
image:../../{{book.images}}/domain-file.png[]
|
|
|
|
WARNING: Any changes you make to this file while the domain controller is running will not take effect and may even be overwritten
|
|
by the server. Instead use the the command line scripting or the web console of {{book.appserver.name}}. See
|
|
the link:{{book.appserver.admindoc.link}}[{{book.appserver.admindoc.name}}] for more information.
|
|
|
|
Let's look at some aspects of this _domain.xml_ file. The +auth-serve-standalone+ and +auth-server-clustered+ +profile+ XML block is where you are going to make the bulk of your configuration decisions.
|
|
You'll be configuring things here like network connections, caches, and database connections.
|
|
|
|
|
|
.auth-server profile
|
|
[source,xml]
|
|
----
|
|
<profiles>
|
|
<profile name="auth-server-standalone">
|
|
...
|
|
</profile>
|
|
<profile name="auth-server-clustered">
|
|
...
|
|
</profile>
|
|
----
|
|
|
|
The +auth-server-standalone+ profile is a non-clustered setup. The +auth-server-clustered+ profile is the clustered setup.
|
|
|
|
If you scroll down further, you'll see various +socket-binding-groups+ defined.
|
|
|
|
.socket-binding-grous
|
|
[source,xml]
|
|
----
|
|
<socket-binding-groups>
|
|
<socket-binding-group name="standard-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
<socket-binding-group name="ha-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
<!-- load-balancer-sockets should be removed in production systems and replaced with a better softare or hardare based one -->
|
|
<socket-binding-group name="load-balancer-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
</socket-binding-groups>----
|
|
|
|
|
|
This config defines the default port mappings for various connectors that are opened with each
|
|
{{book.project.name}} server instance. Any value that contains +${...}+ is a value that can be overriden on the command line
|
|
with the +-D+ switch, i.e.
|
|
|
|
----
|
|
$ domain.sh -Djboss.http.port=80
|
|
----
|
|
|
|
The definition of the server group for {{book.project.name}} resides in the +server-groups+ XML block. It specifies the domain profile
|
|
that is used (+default+) and also some default boot arguments for the Java VM when the host controller boots an instance. It also
|
|
binds a +socket-binding-group+ to the server group.
|
|
|
|
.server group
|
|
[source,xml]
|
|
----
|
|
<server-groups>
|
|
<!-- load-balancer-group should be removed in production systems and replaced with a better softare or hardare based one -->
|
|
<server-group name="load-balancer-group" profile="load-balancer">
|
|
<jvm name="default">
|
|
<heap size="64m" max-size="512m"/>
|
|
</jvm>
|
|
<socket-binding-group ref="load-balancer-sockets"/>
|
|
</server-group>
|
|
<server-group name="auth-server-group" profile="auth-server-clustered">
|
|
<jvm name="default">
|
|
<heap size="64m" max-size="512m"/>
|
|
</jvm>
|
|
<socket-binding-group ref="ha-sockets"/>
|
|
</server-group>
|
|
</server-groups>
|
|
----
|
|
|
|
|
|
|
|
==== Host Controller Configuration
|
|
|
|
{{book.project.name}} comes with two host controller configuration files that reside in the _.../domain/configuration/_ directory:
|
|
_host-master.xml_ and _host-slave.xml_. _host-master.xml_ is configured to boot up a domain controller, a load balancer, and
|
|
one {{book.project.name}} server instance. _host-slave.xml_ is configured to talk to the domain controller and boot up
|
|
one {{book.project.name}} server instance.
|
|
|
|
NOTE: The load balancer is not a required service. It exists so that you can easily test drive clustering on your development
|
|
machine. While usable in production, you have the option of replacing it if you have a different hardware or software
|
|
based load balancer you want to use.
|
|
|
|
.Host Controller Config
|
|
image:../../{{book.images}}/host-files.png[]
|
|
|
|
To disable the load balancer server instance, edit _host-master.xml_ and comment out or remove the +"load-balancer"+ entry.
|
|
|
|
[source,xml]
|
|
----
|
|
<servers>
|
|
<!-- remove or comment out next line -->
|
|
<server name="load-balancer" group="loadbalancer-group"/>
|
|
...
|
|
</servers>
|
|
----
|
|
|
|
Another interesting thing to note about this file is the declaration of the authentication server instance. It has
|
|
a +port-offset+ setting. Any network port defined in the _domain.xml_ +socket-binding-group+ or the server group
|
|
will have the value of +port-offset+ added to it. For this example domain setup we do this so that ports opened by
|
|
the load balancer server don't conflict with the authentication server instance that is started.
|
|
|
|
[source,xml]
|
|
----
|
|
<servers>
|
|
...
|
|
<server name="server-one" group="auth-server-group">
|
|
<socket-bindings port-offset="150"/>
|
|
</server>
|
|
</servers>
|
|
----
|
|
|
|
==== Server Instance Working Directories
|
|
|
|
Each {{book.project.name}} server instance defined in your host files creates a working directory under _.../domain/servers/{SERVER NAME}_.
|
|
Additional configuration can be put there, and any temporary, log, or data files the server instance needs or creates go there too.
|
|
The structure of these per server directories ends up looking like any other {{book.appserver.name}} booted server.
|
|
|
|
.Working Directories
|
|
image:../../{{book.images}}/domain-server-dir.png[]
|
|
|
|
==== {{book.project.name}} JSon Configuration
|
|
|
|
Unfortunately, there is no centralized way to manage the _keycloak.json_ file. You'll have to manage a copy of this file
|
|
in every server instance you deploy. This file must exist in the _.../domain/servers/{SERVER NAME}/configuration directory.
|
|
|
|
.JSON Configuration
|
|
image:../../{{book.images}}/domain-json-config.png[]
|
|
|
|
|
|
==== Domain Boot Script
|
|
|
|
When running the server in domain mode, there is a specific script you need to run to boot the server depending on your
|
|
operating system. These scripts live in the _bin/_ directory of the server distribution.
|
|
|
|
.Domain Boot Script
|
|
image:../../{{book.images}}/domain-boot-files.png[]
|
|
|
|
To boot the server:
|
|
|
|
.Linux/Unix
|
|
[source]
|
|
----
|
|
$ .../bin/domain.sh --host-config=host-master.xml
|
|
----
|
|
|
|
.Windows
|
|
[source]
|
|
----
|
|
> ...\bin\domain.bat --host-config=host-slave.xml
|
|
----
|
|
|
|
When running the boot script you will need pass in the host controlling configuration file you are going to use via the
|
|
+--host-config+ switch.
|
|
|
|
[[_clustered-domain-example]]
|
|
==== Clustered Domain Example
|
|
|
|
You can test drive clustering using the out-of-the-box _domain.xml_ configuration. This example
|
|
domain is meant to run on one machine and boots up:
|
|
|
|
* a domain controller
|
|
* an HTTP load balancer
|
|
* 2 {{book.project.name}} server instances
|
|
|
|
To simulate running a cluster on two machines, you'll run the +domain.sh+ script twice to start two separate
|
|
host controllers. The first will be the master host controller which will start a domain controller, an HTTP load balancer, and one
|
|
{{book.project.name}} authentication server instance. The second will be a slave host controller that only starts
|
|
up an authentication server instance.
|
|
|
|
===== Setup Slave Connection to Domain Controller
|
|
|
|
Before you can boot things up though, you have to configure the slave host controller so that it can talk securely to the domain
|
|
controller. If you do not do this, then the slave host will not be able to obtain the centralized configuration from the domain controller.
|
|
To set up a secure connection, you have to create a server admin user and a secret that
|
|
will be shared between the master and the slave. You do this by running the +.../bin/add-user.sh+ script.
|
|
|
|
When you run the script select +Management User+ and answer +yes+ when it asks you if the new user is going to be used
|
|
for one AS process to connect to another. This will generate a secret that you'll need to cut and paste into the
|
|
_.../domain/configuration/host-slave.xml_ file.
|
|
|
|
.Add App Server Admin
|
|
[source]
|
|
----
|
|
$ add-user.sh
|
|
What type of user do you wish to add?
|
|
a) Management User (mgmt-users.properties)
|
|
b) Application User (application-users.properties)
|
|
(a): a
|
|
Enter the details of the new user to add.
|
|
Using realm 'ManagementRealm' as discovered from the existing property files.
|
|
Username : admin
|
|
Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.
|
|
- The password should not be one of the following restricted values {root, admin, administrator}
|
|
- The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)
|
|
- The password should be different from the username
|
|
Password :
|
|
Re-enter Password :
|
|
What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)[ ]:
|
|
About to add user 'admin' for realm 'ManagementRealm'
|
|
Is this correct yes/no? yes
|
|
Added user 'admin' to file '/.../standalone/configuration/mgmt-users.properties'
|
|
Added user 'admin' to file '/.../domain/configuration/mgmt-users.properties'
|
|
Added user 'admin' with groups to file '/.../standalone/configuration/mgmt-groups.properties'
|
|
Added user 'admin' with groups to file '/.../domain/configuration/mgmt-groups.properties'
|
|
Is this new user going to be used for one AS process to connect to another AS process?
|
|
e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.
|
|
yes/no? yes
|
|
To represent the user add the following to the server-identities definition <secret value="bWdtdDEyMyE=" />
|
|
----
|
|
|
|
Now cut and paste the secret value into the _.../domain/configuration/host-slave.xml_ file as follows:
|
|
|
|
[source,xml]
|
|
----
|
|
<management>
|
|
<security-realms>
|
|
<security-realm name="ManagementRealm">
|
|
<server-identities>
|
|
<secret value="bWdtdDEyMyE="/>
|
|
</server-identities>
|
|
----
|
|
|
|
===== Run the Boot Scripts
|
|
|
|
Since we're simulating a two node cluster on one development machine, you'll run the boot script twice:
|
|
|
|
.Boot up master
|
|
[source,shell]
|
|
----
|
|
$ domain.sh --host-config=host-master.xml
|
|
----
|
|
|
|
.Boot up slave
|
|
[source,shell]
|
|
----
|
|
$ domain.sh --host-config=host-slave.xml
|
|
----
|
|
|
|
To try it out, open your browser and go to http://localhost:8080/auth
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|