keycloak-scim/docs/guides/server/containers.adoc
Alex Szczuczko 34a61d72e5
Add chmod to ADD examples in docs (#29626)
Closes #29625

Signed-off-by: Alex Szczuczko <aszczucz@redhat.com>
2024-05-17 09:15:37 +02:00

262 lines
12 KiB
Text

<#import "/templates/guide.adoc" as tmpl>
<#import "/templates/kc.adoc" as kc>
<#import "/templates/options.adoc" as opts>
<#import "/templates/links.adoc" as links>
<#import "/templates/profile.adoc" as profile>
<@tmpl.guide
title="Running {project_name} in a container"
summary="Learn how to run {project_name} from a container image"
includedOptions="db db-url db-username db-password features hostname https-key-store-file https-key-store-password health-enabled metrics-enabled">
This {section} describes how to optimize and run the {project_name} container image to provide the best experience running a container.
<@profile.ifProduct>
WARNING: This chapter applies only for building an image that you run in a OpenShift environment. Only an OpenShift environment is supported for this image. It is not supported if you run it in other Kubernetes distributions.
</@profile.ifProduct>
== Creating a customized and optimized container image
The default {project_name} container image ships ready to be configured and optimized.
For the best start up of your {project_name} container, build an image by running the `build` step during the container build.
This step will save time in every subsequent start phase of the container image.
=== Writing your optimized {project_name} Dockerfile
The following `Dockerfile` creates a pre-configured {project_name} image that enables the health and metrics endpoints, enables the token exchange feature, and uses a PostgreSQL database.
.Dockerfile:
[source,dockerfile,subs="attributes+"]
----
FROM quay.io/keycloak/keycloak:{containerlabel} as builder
# Enable health and metrics support
ENV KC_HEALTH_ENABLED=true
ENV KC_METRICS_ENABLED=true
# Configure a database vendor
ENV KC_DB=postgres
WORKDIR /opt/keycloak
# for demonstration purposes only, please make sure to use proper certificates in production instead
RUN keytool -genkeypair -storepass password -storetype PKCS12 -keyalg RSA -keysize 2048 -dname "CN=server" -alias server -ext "SAN:c=DNS:localhost,IP:127.0.0.1" -keystore conf/server.keystore
RUN /opt/keycloak/bin/kc.sh build
FROM quay.io/keycloak/keycloak:{containerlabel}
COPY --from=builder /opt/keycloak/ /opt/keycloak/
# change these values to point to a running postgres instance
ENV KC_DB=postgres
ENV KC_DB_URL=<DBURL>
ENV KC_DB_USERNAME=<DBUSERNAME>
ENV KC_DB_PASSWORD=<DBPASSWORD>
ENV KC_HOSTNAME=localhost
ENTRYPOINT ["/opt/keycloak/bin/kc.sh"]
----
The build process includes multiple stages:
* Run the `build` command to set server build options to create an optimized image.
* The files generated by the `build` stage are copied into a new image.
* In the final image, additional configuration options for the hostname and database are set so that you don't need to set them again when running the container.
* In the entrypoint, the `kc.sh` enables access to all the distribution sub-commands.
To install custom providers, you just need to define a step to include the JAR file(s) into the `/opt/keycloak/providers` directory.
This step must be placed before the line that `RUNs` the `build` command, as below:
[source,dockerfile,subs="attributes+"]
----
# A example build step that downloads a JAR file from a URL and adds it to the providers directory
FROM quay.io/keycloak/keycloak:{containerlabel} as builder
...
# Add the provider JAR file to the providers directory
ADD --chown=keycloak:keycloak --chmod=644 <MY_PROVIDER_JAR_URL> /opt/keycloak/providers/myprovider.jar
...
# Context: RUN the build command
RUN /opt/keycloak/bin/kc.sh build
----
=== Installing additional RPM packages
If you try to install new software in a stage `+FROM quay.io/keycloak/keycloak+`, you will notice that `+microdnf+`, `+dnf+`, and even `+rpm+` are not installed. Also, very few packages are available, only enough for a `+bash+` shell, and to run {project_name} itself. This is due to security hardening measures, which reduce the attack surface of the {project_name} container.
First, consider if your use case can be implemented in a different way, and so avoid installing new RPMs into the final container:
* A `+RUN curl+` instruction in your Dockerfile can be replaced with `+ADD+`, since that instruction natively supports remote URLs.
* Some common CLI tools can be replaced by creative use of the Linux filesystem. For example, `+ip addr show tap0+` becomes `+cat /sys/class/net/tap0/address+`
* Tasks that need RPMs can be moved to a former stage of an image build, and the results copied across instead.
Here is an example. Running `+update-ca-trust+` in a former build stage, then copying the result forward:
[source, dockerfile]
----
FROM registry.access.redhat.com/ubi9 AS ubi-micro-build
COPY mycertificate.crt /etc/pki/ca-trust/source/anchors/mycertificate.crt
RUN update-ca-trust
FROM quay.io/keycloak/keycloak
COPY --from=ubi-micro-build /etc/pki /etc/pki
----
It is possible to install new RPMs if absolutely required, following this two-stage pattern established by ubi-micro:
[source, dockerfile]
----
FROM registry.access.redhat.com/ubi9 AS ubi-micro-build
RUN mkdir -p /mnt/rootfs
RUN dnf install --installroot /mnt/rootfs <package names go here> --releasever 9 --setopt install_weak_deps=false --nodocs -y && \
dnf --installroot /mnt/rootfs clean all && \
rpm --root /mnt/rootfs -e --nodeps setup
FROM quay.io/keycloak/keycloak
COPY --from=ubi-micro-build /mnt/rootfs /
----
This approach uses a chroot, `+/mnt/rootfs+`, so that only the packages you specify and their dependencies are installed, and so can be easily copied into the second stage without guesswork.
WARNING: Some packages have a large tree of dependencies. By installing new RPMs you may unintentionally increase the container's attack surface. Check the list of installed packages carefully.
=== Building the container image
To build the actual container image, run the following command from the directory containing your Dockerfile:
[source,bash]
----
podman|docker build . -t mykeycloak
----
=== Starting the optimized {project_name} container image
To start the image, run:
[source, bash]
----
podman|docker run --name mykeycloak -p 8443:8443 \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
mykeycloak \
start --optimized
----
{project_name} starts in production mode, using only secured HTTPS communication, and is available on `https://localhost:8443`.
Health check endpoints are available at `https://localhost:8443/health`, `https://localhost:8443/health/ready` and `https://localhost:8443/health/live`.
Opening up `https://localhost:8443/metrics` leads to a page containing operational metrics that could be used by your monitoring solution.
== Exposing the container to a different port
By default, the server is listening for `http` and `https` requests using the ports `8080` and `8443`, respectively.
If you want to expose the container using a different port, you need to set the `hostname-port` accordingly:
. Exposing the container using a port other than the default ports
[source, bash]
----
podman|docker run --name mykeycloak -p 3000:8443 \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
mykeycloak \
start --optimized --hostname-port=3000
----
By setting the `hostname-port` option you can now access the server at `https://localhost:3000`.
== Trying {project_name} in development mode
The easiest way to try {project_name} from a container for development or testing purposes is to use the Development mode.
You use the `start-dev` command:
[source,bash,subs="attributes+"]
----
podman|docker run --name mykeycloak -p 8080:8080 \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
quay.io/keycloak/keycloak:{containerlabel} \
start-dev
----
Invoking this command starts the {project_name} server in development mode.
This mode should be strictly avoided in production environments because it has insecure defaults.
For more information about running {project_name} in production, see <@links.server id="configuration-production"/>.
== Running a standard {project_name} container
In keeping with concepts such as immutable infrastructure, containers need to be re-provisioned routinely.
In these environments, you need containers that start fast, therefore you need to create an optimized image as described in the preceding section.
However, if your environment has different requirements, you can run a standard {project_name} image by just running the `start` command.
For example:
[source,bash,subs="attributes+"]
----
podman|docker run --name mykeycloak -p 8080:8080 \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
quay.io/keycloak/keycloak:{containerlabel} \
start \
--db=postgres --features=token-exchange \
--db-url=<JDBC-URL> --db-username=<DB-USER> --db-password=<DB-PASSWORD> \
--https-key-store-file=<file> --https-key-store-password=<password>
----
Running this command starts a {project_name} server that detects and applies the build options first.
In the example, the line `--db=postgres --features=token-exchange` sets the database vendor to PostgreSQL and enables the token exchange feature.
{project_name} then starts up and applies the configuration for the specific environment.
This approach significantly increases startup time and creates an image that is mutable, which is not the best practice.
== Provide initial admin credentials when running in a container
{project_name} only allows to create the initial admin user from a local network connection. This is not the case when running in a container, so you have to provide the following environment variables when you run the image:
[source, bash]
----
# setting the admin username
-e KEYCLOAK_ADMIN=<admin-user-name>
# setting the initial password
-e KEYCLOAK_ADMIN_PASSWORD=change_me
----
== Importing A Realm On Startup
The {project_name} containers have a directory `/opt/keycloak/data/import`. If you put one or more import files in that directory via a volume mount or other means and add the startup argument `--import-realm`, the {project_name} container will import that data on startup! This may only make sense to do in Dev mode.
[source,bash,subs="attributes+"]
----
podman|docker run --name keycloak_unoptimized -p 8080:8080 \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
-v /path/to/realm/data:/opt/keycloak/data/import \
quay.io/keycloak/keycloak:{containerlabel} \
start-dev --import-realm
----
Feel free to join the open https://github.com/keycloak/keycloak/discussions/8549[GitHub Discussion] around enhancements of the admin bootstrapping process.
== Specifying different memory settings
The {project_name} container, instead of specifying hardcoded values for the initial and maximum heap size, uses relative values to the total memory of a container.
This behavior is achieved by JVM options `-XX:MaxRAMPercentage=70`, and `-XX:InitialRAMPercentage=50`.
The `-XX:MaxRAMPercentage` option represents the maximum heap size as 70% of the total container memory.
The `-XX:InitialRAMPercentage` option represents the initial heap size as 50% of the total container memory.
These values were chosen based on a deeper analysis of {project_name} memory management.
As the heap size is dynamically calculated based on the total container memory, you should *always set the memory limit* for the container.
Previously, the maximum heap size was set to 512 MB, and in order to approach similar values, you should set the memory limit to at least 750 MB.
For smaller production-ready deployments, the recommended memory limit is 2 GB.
The JVM options related to the heap might be overridden by setting the environment variable `JAVA_OPTS_KC_HEAP`.
You can find the default values of the `JAVA_OPTS_KC_HEAP` in the source code of the `kc.sh`, or `kc.bat` script.
For example, you can specify the environment variable and memory limit as follows:
[source,bash,subs="attributes+"]
----
podman|docker run --name mykeycloak -p 8080:8080 -m 1g \
-e KEYCLOAK_ADMIN=admin -e KEYCLOAK_ADMIN_PASSWORD=change_me \
-e JAVA_OPTS_KC_HEAP="-XX:MaxHeapFreeRatio=30 -XX:MaxRAMPercentage=65" \
quay.io/keycloak/keycloak:{containerlabel} \
start-dev
----
WARNING: If the memory limit is not set, the memory consumption rapidly increases as the heap size can grow up to 70% of the total container memory.
Once the JVM allocates the memory, it is returned to the OS reluctantly with the current {project_name} GC settings.
</@tmpl.guide>