297 lines
13 KiB
Text
297 lines
13 KiB
Text
|
|
[[_domain-mode]]
|
|
=== Domain Clustered Mode
|
|
|
|
Domain mode is a way to centrally manage and publish the configuration for your servers.
|
|
|
|
Running a cluster in standard mode can quickly become aggravating as the cluster grows in size. Every time you need
|
|
to make a configuration change, you have perform it on each node in the cluster. Domain mode solves this problem by providing
|
|
a central place to store and publish configuration. It can be quite complex to set up, but it is worth it in the end.
|
|
This capability is built into the {appserver_name} Application Server which {project_name} derives from.
|
|
|
|
NOTE: The guide will go over the very basics of domain mode. Detailed steps on how to set up domain mode in a cluster should be obtained from the
|
|
link:{appserver_admindoc_link}[_{appserver_admindoc_name}_].
|
|
|
|
Here are some of the basic concepts of running in domain mode.
|
|
|
|
domain controller::
|
|
The domain controller is a process that is responsible for storing, managing, and publishing the general configuration
|
|
for each node in the cluster. This process is the central point from which nodes in a cluster obtain their configuration.
|
|
|
|
host controller::
|
|
The host controller is responsible for managing server instances on a specific machine. You configure it to run
|
|
one or more server instances. The domain controller can also interact with the host controllers on each machine to
|
|
manage the cluster. To reduce the number of running process, a domain controller also acts as a host controller on
|
|
the machine it runs on.
|
|
|
|
domain profile::
|
|
A domain profile is a named set of configuration that can be used by a server to boot from. A domain controller
|
|
can define multiple domain profiles that are consumed by different servers.
|
|
|
|
server group::
|
|
A server group is a collection of servers. They are managed and configured as one. You can assign a domain profile to a server group and every service in that
|
|
group will use that domain profile as their configuration.
|
|
|
|
In domain mode, a domain controller is started on a master node. The configuration for the cluster resides in the domain controller.
|
|
Next a host controller is started on each machine in the cluster. Each host controller deployment configuration specifies how
|
|
many {project_name} server instances will be started on that machine. When the host controller boots up, it starts
|
|
as many {project_name} server instances as it was configured to do. These server instances pull their configuration
|
|
from the domain controller.
|
|
|
|
NOTE: In some environments, such as Microsoft Azure, the domain mode is not applicable. Please consult the {appserver_name} documentation.
|
|
|
|
==== Domain Configuration
|
|
|
|
Various other chapters in this guide walk you through configuring various aspects like databases,
|
|
HTTP network connections, caches, and other infrastructure related things. While standalone mode uses the _standalone.xml_ file to configure these things,
|
|
domain mode uses the _.../domain/configuration/domain.xml_ configuration file. This is
|
|
where the domain profile and server group for the {project_name} server are defined.
|
|
|
|
|
|
.domain.xml
|
|
image:{project_images}/domain-file.png[]
|
|
|
|
WARNING: Any changes you make to this file while the domain controller is running will not take effect and may even be overwritten
|
|
by the server. Instead use the command line scripting or the web console of {appserver_name}. See
|
|
the link:{appserver_admindoc_link}[_{appserver_admindoc_name}_] for more information.
|
|
|
|
Let's look at some aspects of this _domain.xml_ file. The `auth-server-standalone` and `auth-server-clustered` `profile` XML blocks are where you are going to make the bulk of your configuration decisions.
|
|
You'll be configuring things here like network connections, caches, and database connections.
|
|
|
|
|
|
.auth-server profile
|
|
[source,xml]
|
|
----
|
|
<profiles>
|
|
<profile name="auth-server-standalone">
|
|
...
|
|
</profile>
|
|
<profile name="auth-server-clustered">
|
|
...
|
|
</profile>
|
|
----
|
|
|
|
The `auth-server-standalone` profile is a non-clustered setup. The `auth-server-clustered` profile is the clustered setup.
|
|
|
|
If you scroll down further, you'll see various `socket-binding-groups` defined.
|
|
|
|
.socket-binding-groups
|
|
[source,xml]
|
|
----
|
|
<socket-binding-groups>
|
|
<socket-binding-group name="standard-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
<socket-binding-group name="ha-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
<!-- load-balancer-sockets should be removed in production systems and replaced with a better software or hardware based one -->
|
|
<socket-binding-group name="load-balancer-sockets" default-interface="public">
|
|
...
|
|
</socket-binding-group>
|
|
</socket-binding-groups>
|
|
----
|
|
|
|
|
|
This config defines the default port mappings for various connectors that are opened with each
|
|
{project_name} server instance. Any value that contains `${...}` is a value that can be overridden on the command line
|
|
with the `-D` switch, i.e.
|
|
|
|
----
|
|
$ domain.sh -Djboss.http.port=80
|
|
----
|
|
|
|
The definition of the server group for {project_name} resides in the `server-groups` XML block. It specifies the domain profile
|
|
that is used (`default`) and also some default boot arguments for the Java VM when the host controller boots an instance. It also
|
|
binds a `socket-binding-group` to the server group.
|
|
|
|
.server group
|
|
[source,xml]
|
|
----
|
|
<server-groups>
|
|
<!-- load-balancer-group should be removed in production systems and replaced with a better software or hardware based one -->
|
|
<server-group name="load-balancer-group" profile="load-balancer">
|
|
<jvm name="default">
|
|
<heap size="64m" max-size="512m"/>
|
|
</jvm>
|
|
<socket-binding-group ref="load-balancer-sockets"/>
|
|
</server-group>
|
|
<server-group name="auth-server-group" profile="auth-server-clustered">
|
|
<jvm name="default">
|
|
<heap size="64m" max-size="512m"/>
|
|
</jvm>
|
|
<socket-binding-group ref="ha-sockets"/>
|
|
</server-group>
|
|
</server-groups>
|
|
----
|
|
|
|
|
|
|
|
==== Host Controller Configuration
|
|
|
|
{project_name} comes with two host controller configuration files that reside in the _.../domain/configuration/_ directory:
|
|
_host-master.xml_ and _host-slave.xml_. _host-master.xml_ is configured to boot up a domain controller, a load balancer, and
|
|
one {project_name} server instance. _host-slave.xml_ is configured to talk to the domain controller and boot up
|
|
one {project_name} server instance.
|
|
|
|
NOTE: The load balancer is not a required service. It exists so that you can easily test drive clustering on your development
|
|
machine. While usable in production, you have the option of replacing it if you have a different hardware or software
|
|
based load balancer you want to use.
|
|
|
|
.Host Controller Config
|
|
image:{project_images}/host-files.png[]
|
|
|
|
To disable the load balancer server instance, edit _host-master.xml_ and comment out or remove the `"load-balancer"` entry.
|
|
|
|
[source,xml]
|
|
----
|
|
<servers>
|
|
<!-- remove or comment out next line -->
|
|
<server name="load-balancer" group="loadbalancer-group"/>
|
|
...
|
|
</servers>
|
|
----
|
|
|
|
Another interesting thing to note about this file is the declaration of the authentication server instance. It has
|
|
a `port-offset` setting. Any network port defined in the _domain.xml_ `socket-binding-group` or the server group
|
|
will have the value of `port-offset` added to it. For this example domain setup we do this so that ports opened by
|
|
the load balancer server don't conflict with the authentication server instance that is started.
|
|
|
|
[source,xml]
|
|
----
|
|
<servers>
|
|
...
|
|
<server name="server-one" group="auth-server-group" auto-start="true">
|
|
<socket-bindings port-offset="150"/>
|
|
</server>
|
|
</servers>
|
|
----
|
|
|
|
==== Server Instance Working Directories
|
|
|
|
Each {project_name} server instance defined in your host files creates a working directory under _.../domain/servers/{SERVER NAME}_.
|
|
Additional configuration can be put there, and any temporary, log, or data files the server instance needs or creates go there too.
|
|
The structure of these per server directories ends up looking like any other {appserver_name} booted server.
|
|
|
|
.Working Directories
|
|
image:{project_images}/domain-server-dir.png[]
|
|
|
|
==== Domain Boot Script
|
|
|
|
When running the server in domain mode, there is a specific script you need to run to boot the server depending on your
|
|
operating system. These scripts live in the _bin/_ directory of the server distribution.
|
|
|
|
.Domain Boot Script
|
|
image:{project_images}/domain-boot-files.png[]
|
|
|
|
To boot the server:
|
|
|
|
.Linux/Unix
|
|
[source]
|
|
----
|
|
$ .../bin/domain.sh --host-config=host-master.xml
|
|
----
|
|
|
|
.Windows
|
|
[source]
|
|
----
|
|
> ...\bin\domain.bat --host-config=host-master.xml
|
|
----
|
|
|
|
When running the boot script you will need pass in the host controlling configuration file you are going to use via the
|
|
`--host-config` switch.
|
|
|
|
[[_clustered-domain-example]]
|
|
==== Clustered Domain Example
|
|
|
|
You can test drive clustering using the out-of-the-box _domain.xml_ configuration. This example
|
|
domain is meant to run on one machine and boots up:
|
|
|
|
* a domain controller
|
|
* an HTTP load balancer
|
|
* 2 {project_name} server instances
|
|
|
|
To simulate running a cluster on two machines, you'll run the `domain.sh` script twice to start two separate
|
|
host controllers. The first will be the master host controller which will start a domain controller, an HTTP load balancer, and one
|
|
{project_name} authentication server instance. The second will be a slave host controller that only starts
|
|
up an authentication server instance.
|
|
|
|
===== Setup Slave Connection to Domain Controller
|
|
|
|
Before you can boot things up though, you have to configure the slave host controller so that it can talk securely to the domain
|
|
controller. If you do not do this, then the slave host will not be able to obtain the centralized configuration from the domain controller.
|
|
To set up a secure connection, you have to create a server admin user and a secret that
|
|
will be shared between the master and the slave. You do this by running the `.../bin/add-user.sh` script.
|
|
|
|
When you run the script select `Management User` and answer `yes` when it asks you if the new user is going to be used
|
|
for one AS process to connect to another. This will generate a secret that you'll need to cut and paste into the
|
|
_.../domain/configuration/host-slave.xml_ file.
|
|
|
|
.Add App Server Admin
|
|
[source]
|
|
----
|
|
$ add-user.sh
|
|
What type of user do you wish to add?
|
|
a) Management User (mgmt-users.properties)
|
|
b) Application User (application-users.properties)
|
|
(a): a
|
|
Enter the details of the new user to add.
|
|
Using realm 'ManagementRealm' as discovered from the existing property files.
|
|
Username : admin
|
|
Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.
|
|
- The password should not be one of the following restricted values {root, admin, administrator}
|
|
- The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)
|
|
- The password should be different from the username
|
|
Password :
|
|
Re-enter Password :
|
|
What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)[ ]:
|
|
About to add user 'admin' for realm 'ManagementRealm'
|
|
Is this correct yes/no? yes
|
|
Added user 'admin' to file '/.../standalone/configuration/mgmt-users.properties'
|
|
Added user 'admin' to file '/.../domain/configuration/mgmt-users.properties'
|
|
Added user 'admin' with groups to file '/.../standalone/configuration/mgmt-groups.properties'
|
|
Added user 'admin' with groups to file '/.../domain/configuration/mgmt-groups.properties'
|
|
Is this new user going to be used for one AS process to connect to another AS process?
|
|
e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.
|
|
yes/no? yes
|
|
To represent the user add the following to the server-identities definition <secret value="bWdtdDEyMyE=" />
|
|
----
|
|
|
|
NOTE: The add-user.sh does not add user to {project_name} server but to the underlying JBoss Enterprise Application Platform. The credentials used and generated in the above script are only for example purpose. Please use the ones generated on your system.
|
|
|
|
Now cut and paste the secret value into the _.../domain/configuration/host-slave.xml_ file as follows:
|
|
|
|
[source,xml]
|
|
----
|
|
<management>
|
|
<security-realms>
|
|
<security-realm name="ManagementRealm">
|
|
<server-identities>
|
|
<secret value="bWdtdDEyMyE="/>
|
|
</server-identities>
|
|
----
|
|
|
|
You will also need to add the _username_ of the created user in the _.../domain/configuration/host-slave.xml_ file:
|
|
|
|
[source,xml]
|
|
----
|
|
<remote security-realm="ManagementRealm" username="admin">
|
|
----
|
|
|
|
===== Run the Boot Scripts
|
|
|
|
Since we're simulating a two node cluster on one development machine, you'll run the boot script twice:
|
|
|
|
.Boot up master
|
|
[source,shell]
|
|
----
|
|
$ domain.sh --host-config=host-master.xml
|
|
----
|
|
|
|
.Boot up slave
|
|
[source,shell]
|
|
----
|
|
$ domain.sh --host-config=host-slave.xml
|
|
----
|
|
|
|
To try it out, open your browser and go to http://localhost:8080/auth.
|