How To Run various testsuite configurations
===========================================

## Base steps

It's recomended to build the workspace including distribution.

    
    cd $KEYCLOAK_SOURCES
    mvn clean install -DskipTests=true
    cd distribution
    mvn clean install
    

## Debugging - tips & tricks

### Arquillian debugging

Adding this system property when running any test:

    
    -Darquillian.debug=true
    
will add lots of info to the log. Especially about:
* The test method names, which will be executed for each test class, will be written at the proper running order to the log at the beginning of each test class(done by KcArquillian class). 
* All the triggered arquillian lifecycle events and executed observers listening to those events will be written to the log
* The bootstrap of WebDriver will be unlimited. By default there is just 1 minute timeout and test is cancelled when WebDriver is not bootstrapped within it.

### WebDriver timeout

By default, WebDriver has 10 seconds timeout to load every page and it timeouts with error after that. Use this to increase timeout to 1 hour instead:

    
    -Dpageload.timeout=3600000
    
    
### Surefire debugging

For debugging, the best is to run the test from IDE and debug it directly. When you use embedded Undertow (which is by default), then JUnit test, Keycloak server 
and adapter are all in the same JVM and you can debug them easily. If it is not an option and you are forced to test with Maven and Wildfly (or EAP), you can use this:
 
   
    -Dmaven.surefire.debug=true
   
   
and you will be able to attach remote debugger to the test. Unfortunately server and adapter are running in different JVMs, so this won't help to debug those. 

TODO: Improve and add more info about Wildfly debugging...

## Testsuite logging

It is configured in `testsuite/integration-arquillian/tests/base/src/test/resources/log4j.properties` . You can see that logging of testsuite itself (category `org.keycloak.testsuite`) is debug by default.

When you run tests with undertow (which is by default), there is logging for Keycloak server and adapter (category `org.keycloak` ) in `info` when you run tests from IDE, but `off` when 
you run tests with maven. The reason is that, we don't want huge logs when running mvn build. However using system property `keycloak.logging.level` will override it. This can be used for both IDE or maven.
So for example using `-Dkeycloak.logging.level=debug` will enable debug logging for keycloak server and adapter. 

For more fine-tuning of individual categories, you can look at log4j.properties file and temporarily enable/disable them here.

TODO: Add info about Wildfly logging

## Run adapter tests

### Wildfly

    
    # Prepare servers
    mvn -f testsuite/integration-arquillian/servers/pom.xml clean install \
       -Pauth-server-wildfly \
       -Papp-server-wildfly

    # Run tests
    mvn -f testsuite/integration-arquillian/tests/other/adapters/jboss/wildfly/pom.xml \
       clean install \
       -Pauth-server-wildfly \
       -Papp-server-wildfly
    

### JBoss Fuse 6.3

1) Download JBoss Fuse 6.3 to your filesystem. It can be downloaded from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/org/jboss/fuse/jboss-fuse-karaf 
Assumed you downloaded `jboss-fuse-karaf-6.3.0.redhat-229.zip`

2) Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to Fuse repo):


    mvn install:install-file \
      -DgroupId=org.jboss.fuse \
      -DartifactId=jboss-fuse-karaf \
      -Dversion=6.3.0.redhat-229 \
      -Dpackaging=zip \
      -Dfile=/mydownloads/jboss-fuse-karaf-6.3.0.redhat-229.zip


3) Prepare Fuse and run the tests (change props according to your environment, versions etc):


    # Prepare Fuse server
    mvn -f testsuite/integration-arquillian/servers \
      clean install \
      -Pauth-server-wildfly \
      -Papp-server-fuse63 \
      -Dfuse63.version=6.3.0.redhat-229 \
      -Dapp.server.karaf.update.config=true \
      -Dmaven.local.settings=$HOME/.m2/settings.xml \
      -Drepositories=,http://download.eng.bos.redhat.com/brewroot/repos/sso-7.1-build/latest/maven/ \
      -Dmaven.repo.local=$HOME/.m2/repository
 
    # Run the Fuse adapter tests
    mvn -f testsuite/integration-arquillian/tests/other/adapters/karaf/fuse63/pom.xml \
      clean install \
      -Pauth-server-wildfly \
      -Papp-server-fuse63 \
      -Dfuse63.version=6.3.0.redhat-229


### EAP6 with Hawtio

1) Download JBoss EAP 6.4.0.GA zip

2) Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to EAP repo):


    mvn install:install-file \
      -DgroupId=org.jboss.as \
      -DartifactId=jboss-as-dist \
      -Dversion=7.5.0.Final-redhat-21 \
      -Dpackaging=zip \
      -Dfile=/mydownloads/jboss-eap-6.4.0.zip


3) Download Fuse EAP installer (for example from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/com/redhat/fuse/eap/fuse-eap-installer/6.3.0.redhat-220/ )

4) Install previously downloaded file manually


    mvn install:install-file \
      -DgroupId=com.redhat.fuse.eap \
      -DartifactId=fuse-eap-installer \
      -Dversion=6.3.0.redhat-220 \
      -Dpackaging=jar \
      -Dfile=/fuse-eap-installer-6.3.0.redhat-220.jar


5) Prepare EAP6 with Hawtio and run the test


    # Prepare EAP6 and deploy hawtio
    mvn -f testsuite/integration-arquillian/servers \
      clean install \
      -Pauth-server-wildfly \
      -Papp-server-eap6-fuse \
      -Dapp.server.jboss.version=7.5.0.Final-redhat-21 \
      -Dfuse.installer.version=6.3.0.redhat-220
 
    # Run the test
    mvn -f testsuite/integration-arquillian/tests/other/adapters/jboss/eap6-fuse/pom.xml \
      clean install \
      -Pauth-server-wildfly \
      -Papp-server-eap6-fuse  
 

## Migration test

### DB migration test

This test will:
 - start Keycloak 1.9.8 (replace with the other version if needed)
 - import realm and some data to MySQL DB
 - stop Keycloak 1.9.8
 - start latest Keycloak, which automatically updates DB from 1.9.8
 - Do some test that data are correct
 

1) Prepare MySQL DB and ensure that MySQL DB is empty. See [../../misc/DatabaseTesting.md](../../misc/DatabaseTesting.md) for some hints for locally prepare Docker MySQL image.

2) Run the test (Update according to your DB connection, versions etc):


    export DB_HOST=localhost

    mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
      -Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration \
      -Dtest=MigrationTest \
      -Dmigration.mode=auto \
      -Dmigrated.auth.server.version=1.9.8.Final \
      -Djdbc.mvn.groupId=mysql \
      -Djdbc.mvn.version=5.1.29 \
      -Djdbc.mvn.artifactId=mysql-connector-java \
      -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \
      -Dkeycloak.connectionsJpa.user=keycloak \
      -Dkeycloak.connectionsJpa.password=keycloak
      
### DB migration test with manual mode
      
Same test as above, but it uses manual migration mode. During startup of the new Keycloak server, Liquibase won't automatically perform DB update, but it 
just exports the needed SQL into the script. This SQL script then needs to be manually executed against the DB.

1) Prepare MySQL DB (Same as above)

2) Run the test (Update according to your DB connection, versions etc). This step will end with failure, but that's expected:

    mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
      -Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration \
      -Dtest=MigrationTest \
      -Dmigration.mode=manual \
      -Dmigrated.auth.server.version=1.9.8.Final \
      -Djdbc.mvn.groupId=mysql \
      -Djdbc.mvn.version=5.1.29 \
      -Djdbc.mvn.artifactId=mysql-connector-java \
      -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \
      -Dkeycloak.connectionsJpa.user=keycloak \
      -Dkeycloak.connectionsJpa.password=keycloak
      
3) Manually execute the SQL script against your DB. With Mysql, you can use this command (KEYCLOAK_SRC points to the directory with the Keycloak codebase):
       
    mysql -h $DB_HOST -u keycloak -pkeycloak < $KEYCLOAK_SRC/testsuite/integration-arquillian/tests/base/target/containers/auth-server-wildfly/keycloak-database-update.sql       

4) Finally run the migration test, which will verify that DB migration was successful. This should end with success:
 
    mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
      clean install \
      -Pauth-server-wildfly \
      -Dskip.add.user.json=true \
      -Dmigrated.auth.server.version=1.9.8.Final \
      -Dtest=MigrationTest   

### JSON export/import migration test
This will start latest Keycloak and import the realm JSON file, which was previously exported from Keycloak 1.9.8.Final
  

    mvn -f testsuite/integration-arquillian/pom.xml \
      clean install \
      -Pauth-server-wildfly,migration-import \
      -Dtest=MigrationTest \
      -Dmigration.mode=import \
      -Dmigrated.auth.server.version=1.9.8.Final


## UI tests
The UI tests are real-life, UI focused integration tests. Hence they do not support the default HtmlUnit browser. Only the following real-life browsers are supported: Mozilla Firefox, Google Chrome and Internet Explorer. For details on how to run the tests with these browsers, please refer to [Different Browsers](#different-browsers) chapter.

The UI tests are focused on the Admin Console as well as on some login scenarios. They are placed in the `console` module and are disabled by default.

The tests also use some constants placed in [test-constants.properties](tests/base/src/test/resources/test-constants.properties). A different file can be specified by `-Dtestsuite.constants=path/to/different-test-constants.properties`

#### Execution example
```
mvn -f testsuite/integration-arquillian/tests/other/console/pom.xml \
    clean test \
    -Dbrowser=firefox \
    -Dfirefox_binary=/opt/firefox-45.1.1esr/firefox
```

## Welcome Page tests
The Welcome Page tests need to be run on WildFly/EAP and with `-Dskip.add.user.json` switch. So that they are disabled by default and are meant to be run separately.


    # Prepare servers
    mvn -f testsuite/integration-arquillian/servers/pom.xml \
        clean install \
        -Pauth-server-wildfly \
        -Papp-server-wildfly

    # Run tests
    mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
        clean test \
        -Dtest=WelcomePageTest \
        -Dskip.add.user.json \
        -Pauth-server-wildfly


## Social Login
The social login tests require setup of all social networks including an example social user. These details can't be 
shared as it would result in the clients and users eventually being blocked. By default these tests are skipped.
   
To run the full test you need to configure clients in Google, Facebook, GitHub, Twitter, LinkedIn, Microsoft and 
StackOverflow. See the server administration guide for details on how to do that. Further, you also need to create a 
sample user that can login to the social network.
 
The details should be added to a standard properties file. For some properties you can use shared common properties and
override when needed. Or you can specify these for all providers. All providers require at least clientId and 
clientSecret (StackOverflow also requires clientKey).
 
An example social.properties file looks like:

    common.username=sampleuser@example.org
    common.password=commonpassword
    common.profile.firstName=Foo
    common.profile.lastName=Bar
    common.profile.email=sampleuser@example.org

    google.clientId=asdfasdfasdfasdfsadf
    google.clientSecret=zxcvzxcvzxcvzxcv

    facebook.clientId=asdfasdfasdfasdfsadf
    facebook.clientSecret=zxcvzxcvzxcvzxcv
    facebook.profile.lastName=Test

In the example above the common username, password and profile are shared for all providers, but Facebook has a 
different last name.

Some providers actively block bots so you need to use a proper browser to test. Either Firefox or Chrome should work.

To run the tests run:

    mvn -f testsuite/integration-arquillian/pom.xml \
          clean install \
          -Pauth-server-wildfly \
          -Dtest=SocialLoginTest \
          -Dbrowser=chrome \
          -Dsocial.config=/path/to/social.properties


## Different Browsers
 
#### Mozilla Firefox
* **Supported version:** [latest ESR](https://www.mozilla.org/en-US/firefox/organizations/) (Extended Support Release)
* **Driver download required:** no
* **Run with:** `-Dbrowser=firefox`; optionally you can specify `-Dfirefox_binary=path/to/firefox/binary`

#### Google Chrome
* **Supported version:** latest stable
* **Driver download required:** [ChromeDriver](https://sites.google.com/a/chromium.org/chromedriver/) which corresponds with your version of the browser
* **Run with:** `-Dbrowser=chrome -Dwebdriver.chrome.driver=path/to/chromedriver`

#### Internet Explorer
* **Supported version:** 11
* **Driver download required:** [Internet Explorer Driver Server](http://www.seleniumhq.org/download/); recommended version [2.53.1 32-bit](http://selenium-release.storage.googleapis.com/2.53/IEDriverServer_Win32_2.53.1.zip)
* **Run with:** `-Dbrowser=internetExplorer -Dwebdriver.ie.driver=path/to/IEDriverServer.exe`
 
## Run X.509 tests

To run the X.509 client certificate authentication tests:

    mvn -f testsuite/integration-arquillian/pom.xml \
          clean install \
	  -Pauth-server-wildfly \
	  -Dauth.server.ssl.required \
	  -Dbrowser=phantomjs \
	  "-Dtest=*.x509.*"
	  
## Cluster tests

Cluster tests use 2 backend servers (Keycloak on Wildfly/EAP) and 1 frontend loadbalancer server node. Invalidation tests don't use loadbalancer. 
The browser usually communicates directly with the backend node1 and after doing some change here (eg. updating user), it verifies that the change is visible on node2 and user is updated here as well.

Failover tests use loadbalancer and they require the setup with the distributed infinispan caches switched to have 2 owners (default value is 1 owner). Otherwise failover won't reliably work. 


The setup includes:

*  a `mod_cluster` load balancer on Wildfly
*  two clustered nodes of Keycloak server on Wildfly/EAP

Clustering tests require MULTICAST to be enabled on machine's `loopback` network interface.
This can be done by running the following commands under root privileges:

    route add -net 224.0.0.0 netmask 240.0.0.0 dev lo
    ifconfig lo multicast

Then after build the sources, distribution and setup of clean shared database (replace command according your DB), you can use this command to setup servers:

    export DB_HOST=localhost
    mvn -f testsuite/integration-arquillian/servers/pom.xml \
    -Pauth-server-wildfly,auth-server-cluster,jpa \
    -Dsession.cache.owners=2 \
    -Djdbc.mvn.groupId=mysql \
    -Djdbc.mvn.version=5.1.29 \
    -Djdbc.mvn.artifactId=mysql-connector-java \
    -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \
    -Dkeycloak.connectionsJpa.user=keycloak \
    -Dkeycloak.connectionsJpa.password=keycloak \
    clean install
    
And then this to run the cluster tests:
   
    mvn -f testsuite/integration-arquillian/tests/base/pom.xml \
    -Pauth-server-wildfly,auth-server-cluster \
    -Dsession.cache.owners=2 \
    -Dbackends.console.output=true \
    -Dauth.server.log.check=false \
    -Dfrontend.console.output=true \
    -Dtest=org.keycloak.testsuite.cluster.**.*Test clean install
   
	  
### Cluster tests with embedded undertow

#### Run cluster tests from IDE

The test uses Undertow loadbalancer on `http://localhost:8180` and two embedded backend Undertow servers with Keycloak on `http://localhost:8181` and `http://localhost:8182` .
You can use any cluster test (eg. AuthenticationSessionFailoverClusterTest) and run from IDE with those system properties (replace with your DB settings):

    -Dauth.server.undertow=false -Dauth.server.undertow.cluster=true -Dauth.server.cluster=true 
    -Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver 
    -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dresources	 
    -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dsession.cache.owners=2    
     
Invalidation tests (subclass of `AbstractInvalidationClusterTest`) don't need last two properties.


#### Run cluster environment from IDE

This mode is useful for develop/manual tests of clustering features. You will need to manually run keycloak backend nodes and loadbalancer. 

1) Run KeycloakServer server1 with:

    -Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver 
    -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true 
    -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dresources

and argument: `-p 8181`

2) Run KeycloakServer server2 with same parameters but argument: `-p 8182`

3) Run loadbalancer (class `SimpleUndertowLoadBalancer`) without arguments and system properties. Loadbalancer runs on port 8180, so you can access Keycloak on `http://localhost:8180/auth`     

## Cross-DC tests

Cross-DC tests use 2 data centers, each with one automatically started and one manually controlled backend servers
(currently only Keycloak on Undertow), and 1 frontend loadbalancer server node that sits in front of all servers.
The browser usually communicates directly with the frontent node and the test controls where the HTTP requests
land by adjusting load balancer configuration (e.g. to direct the traffic to only a single DC).

For an example of a test, see [org.keycloak.testsuite.crossdc.ActionTokenCrossDCTest](tests/base/src/test/java/org/keycloak/testsuite/crossdc/ActionTokenCrossDCTest.java).

The cross DC requires setting a profile specifying used cache server (currently only Infinispan) by specifying
`cache-server-infinispan` profile in maven.

#### Run Cross-DC Tests from Maven

First compile the Infinispan/JDG test server via the following command:

  `mvn -Pcache-server-infinispan -f testsuite/integration-arquillian -DskipTests clean install`

or
  
  `mvn -Pcache-server-jdg -f testsuite/integration-arquillian -DskipTests clean install`

Then you can run the tests using the following command (adjust the test specification according to your needs):

  `mvn -Pcache-server-infinispan -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base test`

or

  `mvn -Pcache-server-jdg -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base test`

_Someone using IntelliJ IDEA, please describe steps for that IDE_