How To Run various testsuite configurations =========================================== ## Base steps It's recomended to build the workspace including distribution. cd $KEYCLOAK_SOURCES mvn clean install -DskipTests=true cd distribution mvn clean install ## Debugging - tips & tricks ### Arquillian debugging Adding this system property when running any test: -Darquillian.debug=true will add lots of info to the log. Especially about: * The test method names, which will be executed for each test class, will be written at the proper running order to the log at the beginning of each test class(done by KcArquillian class). * All the triggered arquillian lifecycle events and executed observers listening to those events will be written to the log * The bootstrap of WebDriver will be unlimited. By default there is just 1 minute timeout and test is cancelled when WebDriver is not bootstrapped within it. ### WebDriver timeout By default, WebDriver has 10 seconds timeout to load every page and it timeouts with error after that. Use this to increase timeout to 1 hour instead: -Dpageload.timeout=3600000 ### Surefire debugging For debugging, the best is to run the test from IDE and debug it directly. When you use embedded Undertow (which is by default), then JUnit test, Keycloak server and adapter are all in the same JVM and you can debug them easily. If it is not an option and you are forced to test with Maven and Wildfly (or EAP), you can use this: -Dmaven.surefire.debug=true and you will be able to attach remote debugger to the test. Unfortunately server and adapter are running in different JVMs, so this won't help to debug those. ### JBoss auth server debugging When tests are run on JBoss based container (WildFly/EAP) there is possibility to attach a debugger, by default on localhost:5005. The server won't wait to attach the debugger. There are some properties what can change the default behaviour. -Dauth.server.debug.port=$PORT -Dauth.server.debug.suspend=y More info: http://javahowto.blogspot.cz/2010/09/java-agentlibjdwp-for-attaching.html ### JBoss app server debugging Analogically, there is the same behaviour for JBoss based app server as for auth server. The default port is set to 5006. There are app server properties. -Dapp.server.debug.port=$PORT -Dapp.server.debug.suspend=y ## Testsuite logging It is configured in `testsuite/integration-arquillian/tests/base/src/test/resources/log4j.properties` . You can see that logging of testsuite itself (category `org.keycloak.testsuite`) is debug by default. When you run tests with undertow (which is by default), there is logging for Keycloak server and adapter (category `org.keycloak` ) in `info` when you run tests from IDE, but `off` when you run tests with maven. The reason is that, we don't want huge logs when running mvn build. However using system property `keycloak.logging.level` will override it. This can be used for both IDE or maven. So for example using `-Dkeycloak.logging.level=debug` will enable debug logging for keycloak server and adapter. For more fine-tuning of individual categories, you can look at log4j.properties file and temporarily enable/disable them here. TODO: Add info about Wildfly logging ## Run adapter tests ### Undertow mvn -f testsuite/integration-arquillian/tests/base/pom.xml \ -Dtest=org.keycloak.testsuite.adapter.**.*Test ### Wildfly # Run tests mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Papp-server-wildfly ### JBoss Fuse 6.3 1) Download JBoss Fuse 6.3 to your filesystem. It can be downloaded from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/org/jboss/fuse/jboss-fuse-karaf Assumed you downloaded `jboss-fuse-karaf-6.3.0.redhat-229.zip` 2) Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to Fuse repo): mvn install:install-file \ -DgroupId=org.jboss.fuse \ -DartifactId=jboss-fuse-karaf \ -Dversion=6.3.0.redhat-229 \ -Dpackaging=zip \ -Dfile=/mydownloads/jboss-fuse-karaf-6.3.0.redhat-229.zip 3) Prepare Fuse and run the tests (change props according to your environment, versions etc): # Prepare Fuse server mvn -f testsuite/integration-arquillian/servers/pom.xml \ clean install \ -Pauth-server-wildfly \ -Papp-server-fuse63 \ -Dfuse63.version=6.3.0.redhat-229 \ -Dapp.server.karaf.update.config=true \ -Dmaven.local.settings=$HOME/.m2/settings.xml \ -Drepositories=,http://REPO-SERVER/brewroot/repos/sso-7.1-build/latest/maven/ \ -Dmaven.repo.local=$HOME/.m2/repository # Run the Fuse adapter tests mvn -f testsuite/integration-arquillian/tests/other/adapters/karaf/fuse63/pom.xml \ clean install \ -Pauth-server-wildfly \ -Papp-server-fuse63 \ -Dfuse63.version=6.3.0.redhat-229 ### JBoss Fuse 7.0 1) Download JBoss Fuse 7.0 to your filesystem. It can be downloaded from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/org/jboss/fuse/fuse-karaf Assumed you downloaded `fuse-karaf-7.0.0.fuse-000202.zip` 2) Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to Fuse repo): mvn install:install-file \ -DgroupId=org.jboss.fuse \ -DartifactId=fuse-karaf \ -Dversion=7.0.0.fuse-000202 \ -Dpackaging=zip \ -Dfile=/mydownloads/fuse-karaf-7.0.0.fuse-000202.zip 3) Prepare Fuse and run the tests (change props according to your environment, versions etc): # Prepare Fuse server mvn -f testsuite/integration-arquillian/servers/pom.xml \ clean install \ -Papp-server-fuse70 \ -Dfuse70.version=7.0.0.fuse-000202 \ -Dapp.server.karaf.update.config=true \ -Dmaven.local.settings=$HOME/.m2/settings.xml \ -Drepositories=,http://REPO-SERVER/brewroot/repos/sso-7.1-build/latest/maven/ \ -Dmaven.repo.local=$HOME/.m2/repository # Run the Fuse adapter tests mvn -f testsuite/integration-arquillian/tests/other/adapters/karaf/fuse70/pom.xml \ clean test \ -Dbrowser=phantomjs \ -Papp-server-fuse70 ### EAP6 with Hawtio 1) Download JBoss EAP 6.4.0.GA zip 2) Install to your local maven repository and change the properties according to your env (This step can be likely avoided if you somehow configure your local maven settings to point directly to EAP repo): mvn install:install-file \ -DgroupId=org.jboss.as \ -DartifactId=jboss-as-dist \ -Dversion=7.5.0.Final-redhat-21 \ -Dpackaging=zip \ -Dfile=/mydownloads/jboss-eap-6.4.0.zip 3) Download Fuse EAP installer (for example from http://origin-repository.jboss.org/nexus/content/groups/m2-proxy/com/redhat/fuse/eap/fuse-eap-installer/6.3.0.redhat-220/ ) 4) Install previously downloaded file manually mvn install:install-file \ -DgroupId=com.redhat.fuse.eap \ -DartifactId=fuse-eap-installer \ -Dversion=6.3.0.redhat-220 \ -Dpackaging=jar \ -Dfile=/fuse-eap-installer-6.3.0.redhat-220.jar 5) Prepare EAP6 with Hawtio and run the test # Prepare EAP6 and deploy hawtio mvn -f testsuite/integration-arquillian/servers \ clean install \ -Pauth-server-wildfly \ -Papp-server-eap6-fuse \ -Dapp.server.jboss.version=7.5.0.Final-redhat-21 \ -Dfuse.installer.version=6.3.0.redhat-220 # Run the test mvn -f testsuite/integration-arquillian/tests/other/adapters/jboss/eap6-fuse/pom.xml \ clean install \ -Pauth-server-wildfly \ -Papp-server-eap6-fuse ## Migration test ### DB migration test This test will: - start Keycloak 1.9.8 (replace with the other version if needed) - import realm and some data to MySQL DB - stop Keycloak 1.9.8 - start latest Keycloak, which automatically updates DB from 1.9.8 - Do some test that data are correct 1) Prepare MySQL DB and ensure that MySQL DB is empty. See [../../misc/DatabaseTesting.md](../../misc/DatabaseTesting.md) for some hints for locally prepare Docker MySQL image. 2) Run the test (Update according to your DB connection, versions etc): export DB_HOST=localhost mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration \ -Dtest=MigrationTest \ -Dmigration.mode=auto \ -Dmigrated.auth.server.version=1.9.8.Final \ -Djdbc.mvn.groupId=mysql \ -Djdbc.mvn.version=5.1.29 \ -Djdbc.mvn.artifactId=mysql-connector-java \ -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \ -Dkeycloak.connectionsJpa.user=keycloak \ -Dkeycloak.connectionsJpa.password=keycloak ### DB migration test with manual mode Same test as above, but it uses manual migration mode. During startup of the new Keycloak server, Liquibase won't automatically perform DB update, but it just exports the needed SQL into the script. This SQL script then needs to be manually executed against the DB. 1) Prepare MySQL DB (Same as above) 2) Run the test (Update according to your DB connection, versions etc). This step will end with failure, but that's expected: mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly,jpa,clean-jpa,auth-server-migration \ -Dtest=MigrationTest \ -Dmigration.mode=manual \ -Dmigrated.auth.server.version=1.9.8.Final \ -Djdbc.mvn.groupId=mysql \ -Djdbc.mvn.version=5.1.29 \ -Djdbc.mvn.artifactId=mysql-connector-java \ -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \ -Dkeycloak.connectionsJpa.user=keycloak \ -Dkeycloak.connectionsJpa.password=keycloak 3) Manually execute the SQL script against your DB. With Mysql, you can use this command (KEYCLOAK_SRC points to the directory with the Keycloak codebase): mysql -h $DB_HOST -u keycloak -pkeycloak < $KEYCLOAK_SRC/testsuite/integration-arquillian/tests/base/target/containers/auth-server-wildfly/keycloak-database-update.sql 4) Finally run the migration test, which will verify that DB migration was successful. This should end with success: mvn -f testsuite/integration-arquillian/tests/base/pom.xml \ clean install \ -Pauth-server-wildfly \ -Dskip.add.user.json=true \ -Dmigrated.auth.server.version=1.9.8.Final \ -Dtest=MigrationTest ### JSON export/import migration test This will start latest Keycloak and import the realm JSON file, which was previously exported from Keycloak 1.9.8.Final mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly,migration-import \ -Dtest=MigrationTest \ -Dmigration.mode=import \ -Dmigrated.auth.server.version=1.9.8.Final ## UI tests The UI tests are real-life, UI focused integration tests. Hence they do not support the default HtmlUnit browser. Only the following real-life browsers are supported: Mozilla Firefox, Google Chrome and Internet Explorer. For details on how to run the tests with these browsers, please refer to [Different Browsers](#different-browsers) chapter. The UI tests are focused on the Admin Console as well as on some login scenarios. They are placed in the `console` module and are disabled by default. The tests also use some constants placed in [test-constants.properties](tests/base/src/test/resources/test-constants.properties). A different file can be specified by `-Dtestsuite.constants=path/to/different-test-constants.properties` In case a custom `settings.xml` is used for Maven, you need to specify it also in `-Dkie.maven.settings.custom=path/to/settings.xml`. #### Execution example ``` mvn -f testsuite/integration-arquillian/tests/other/console/pom.xml \ clean test \ -Dbrowser=firefox \ -Dfirefox_binary=/opt/firefox-45.1.1esr/firefox ``` ## Welcome Page tests The Welcome Page tests need to be run on WildFly/EAP. So that they are disabled by default and are meant to be run separately. # Prepare servers mvn -f testsuite/integration-arquillian/servers/pom.xml \ clean install \ -Pauth-server-wildfly # Run tests mvn -f testsuite/integration-arquillian/tests/other/welcome-page/pom.xml \ clean test \ -Pauth-server-wildfly ## Social Login The social login tests require setup of all social networks including an example social user. These details can't be shared as it would result in the clients and users eventually being blocked. By default these tests are skipped. To run the full test you need to configure clients in Google, Facebook, GitHub, Twitter, LinkedIn, Microsoft, PayPal and StackOverflow. See the server administration guide for details on how to do that. You have to use URLs like `http://localhost:8180/auth/realms/social/broker/google/endpoint` (with `google` replaced by the name of given provider) as an authorized redirect URL when configuring the client. Further, you also need to create a sample user that can login to the social network. The details should be added to a standard properties file. For some properties you can use shared common properties and override when needed. Or you can specify these for all providers. All providers require at least clientId and clientSecret (StackOverflow also requires clientKey). An example social.properties file looks like: common.username=sampleuser@example.org common.password=commonpassword common.profile.firstName=Foo common.profile.lastName=Bar common.profile.email=sampleuser@example.org google.clientId=asdfasdfasdfasdfsadf google.clientSecret=zxcvzxcvzxcvzxcv facebook.clientId=asdfasdfasdfasdfsadf facebook.clientSecret=zxcvzxcvzxcvzxcv facebook.profile.lastName=Test In the example above the common username, password and profile are shared for all providers, but Facebook has a different last name. Profile informations are used for assertion after login, so you have to set them to be same as user profile information returned by given social login provider for used sample user. Some providers actively block bots so you need to use a proper browser to test. Either Firefox or Chrome should work. To run the tests run: mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly \ -Dtest=SocialLoginTest \ -Dbrowser=chrome \ -Dsocial.config=/path/to/social.properties To run individual social provider test only you can use option like `-Dtest=SocialLoginTest#linkedinLogin` ## Different Browsers #### Mozilla Firefox * **Supported version:** [latest ESR](https://www.mozilla.org/en-US/firefox/organizations/) (Extended Support Release) * **Driver download required:** no (using the old legacy Firefox driver) * **Run with:** `-Dbrowser=firefox`; optionally you can specify `-Dfirefox_binary=path/to/firefox/binary` #### Mozilla Firefox with GeckoDriver You can also use Firefox automation with modern Marionette protocol and GeckoDriver. However, this is **highly experimental** and the testsuite may not work as expected. * **Supported version:** as latest as possible (Firefox has better support for Marionette with each version released) * **Driver download required:** [GeckoDriver](https://github.com/mozilla/geckodriver/releases) * **Run with:** `-Dbrowser=firefox -DfirefoxLegacyDriver=false -Dwebdriver.gecko.driver=path/to/geckodriver` #### Google Chrome * **Supported version:** latest stable * **Driver download required:** [ChromeDriver](https://sites.google.com/a/chromium.org/chromedriver/) which corresponds with your version of the browser * **Run with:** `-Dbrowser=chrome -Dwebdriver.chrome.driver=path/to/chromedriver` #### Internet Explorer * **Supported version:** 11 * **Driver download required:** [Internet Explorer Driver Server](http://www.seleniumhq.org/download/); recommended version [3.5.1 32-bit](http://selenium-release.storage.googleapis.com/3.5/IEDriverServer_Win32_3.5.1.zip) * **Run with:** `-Dbrowser=internetExplorer -Dwebdriver.ie.driver=path/to/IEDriverServer.exe` #### Automatic driver downloads You can rely on automatic driver downloads which is provided by [Arquillian Drone](http://arquillian.org/arquillian-extension-drone/#_automatic_download). To do so just omit the `-Dwebdriver.{browser}.driver` CLI argument when running the tests. ## Run X.509 tests To run the X.509 client certificate authentication tests: mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly \ -Dauth.server.ssl.required \ -Dbrowser=phantomjs \ "-Dtest=*.x509.*" ## Run Mutual TLS Client Certificate Bound Access Tokens tests To run the Mutual TLS Client Certificate Bound Access Tokens tests: mvn -f testsuite/integration-arquillian/pom.xml \ clean install \ -Pauth-server-wildfly \ -Dauth.server.ssl.required \ -Dbrowser=phantomjs \ -Dtest=org.keycloak.testsuite.hok.HoKTest ## Cluster tests Cluster tests use 2 backend servers (Keycloak on Wildfly/EAP) and 1 frontend loadbalancer server node. Invalidation tests don't use loadbalancer. The browser usually communicates directly with the backend node1 and after doing some change here (eg. updating user), it verifies that the change is visible on node2 and user is updated here as well. Failover tests use loadbalancer and they require the setup with the distributed infinispan caches switched to have 2 owners (default value is 1 owner). Otherwise failover won't reliably work. The setup includes: * a `mod_cluster` load balancer on Wildfly * two clustered nodes of Keycloak server on Wildfly/EAP Clustering tests require MULTICAST to be enabled on machine's `loopback` network interface. This can be done by running the following commands under root privileges: route add -net 224.0.0.0 netmask 240.0.0.0 dev lo ifconfig lo multicast Then after build the sources, distribution and setup of clean shared database (replace command according your DB), you can use this command to setup servers: export DB_HOST=localhost mvn -f testsuite/integration-arquillian/servers/pom.xml \ -Pauth-server-wildfly,auth-server-cluster,jpa \ -Dsession.cache.owners=2 \ -Djdbc.mvn.groupId=mysql \ -Djdbc.mvn.version=5.1.29 \ -Djdbc.mvn.artifactId=mysql-connector-java \ -Dkeycloak.connectionsJpa.url=jdbc:mysql://$DB_HOST/keycloak \ -Dkeycloak.connectionsJpa.user=keycloak \ -Dkeycloak.connectionsJpa.password=keycloak \ clean install And then this to run the cluster tests: mvn -f testsuite/integration-arquillian/tests/base/pom.xml \ -Pauth-server-wildfly,auth-server-cluster \ -Dsession.cache.owners=2 \ -Dbackends.console.output=true \ -Dauth.server.log.check=false \ -Dfrontend.console.output=true \ -Dtest=org.keycloak.testsuite.cluster.**.*Test clean install ### Cluster tests with embedded undertow #### Run cluster tests from IDE The test uses Undertow loadbalancer on `http://localhost:8180` and two embedded backend Undertow servers with Keycloak on `http://localhost:8181` and `http://localhost:8182` . You can use any cluster test (eg. AuthenticationSessionFailoverClusterTest) and run from IDE with those system properties (replace with your DB settings): -Dauth.server.undertow=false -Dauth.server.undertow.cluster=true -Dauth.server.cluster=true -Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dresources -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dsession.cache.owners=2 Invalidation tests (subclass of `AbstractInvalidationClusterTest`) don't need last two properties. #### Run cluster environment from IDE This mode is useful for develop/manual tests of clustering features. You will need to manually run keycloak backend nodes and loadbalancer. 1) Run KeycloakServer server1 with: -Dkeycloak.connectionsJpa.url=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.sessionsOwners=2 -Dresources and argument: `-p 8181` 2) Run KeycloakServer server2 with same parameters but argument: `-p 8182` 3) Run loadbalancer (class `SimpleUndertowLoadBalancer`) without arguments and system properties. Loadbalancer runs on port 8180, so you can access Keycloak on `http://localhost:8180/auth` ## Cross-DC tests Cross-DC tests use 2 data centers, each with one automatically started and one manually controlled backend servers, and 1 frontend loadbalancer server node that sits in front of all servers. The browser usually communicates directly with the frontent node and the test controls where the HTTP requests land by adjusting load balancer configuration (e.g. to direct the traffic to only a single DC). For an example of a test, see [org.keycloak.testsuite.crossdc.ActionTokenCrossDCTest](tests/base/src/test/java/org/keycloak/testsuite/crossdc/ActionTokenCrossDCTest.java). The cross DC requires setting a profile specifying used cache server by specifying `cache-server-infinispan` or `cache-server-jdg` profile in maven. #### Run Cross-DC Tests from Maven a) Prepare the environment. Compile the infinispan server and eventually Keycloak on JBoss server. a1) If you want to use **Undertow** based Keycloak container, you just need to download and prepare the Infinispan/JDG test server via the following command: `mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -f testsuite/integration-arquillian -DskipTests clean install` *note: 'cache-server-infinispan' can be replaced by 'cache-server-jdg'* a2) If you want to use **JBoss-based** Keycloak backend containers instead of containers on Embedded Undertow, you need to prepare both the Infinispan/JDG test server and the Keycloak server on Wildfly/EAP. Run following command: `mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -f testsuite/integration-arquillian -DskipTests clean install` *note: 'cache-server-infinispan' can be replaced by 'cache-server-jdg'* *note: 'auth-server-wildfly' can be replaced by 'auth-server-eap'* By default JBoss-based containers use TCP-based h2 database. It can be configured to use real DB, e.g. with following command: `mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly,jpa -f testsuite/integration-arquillian -DskipTests clean install -Djdbc.mvn.groupId=org.mariadb.jdbc -Djdbc.mvn.artifactId=mariadb-java-client -Djdbc.mvn.version=2.0.3 -Dkeycloak.connectionsJpa.url=jdbc:mariadb://localhost:3306/keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsJpa.user=keycloak` b1) For **Undertow** Keycloak backend containers, you can run the tests using the following command (adjust the test specification according to your needs): `mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install` *note: 'cache-server-infinispan' can be replaced by 'cache-server-jdg'* *note: It can be useful to add additional system property to enable logging:* `-Dkeycloak.infinispan.logging.level=debug` b2) For **JBoss-based** Keycloak backend containers, you can run the tests like this: `mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -Dtest=*.crossdc.* -pl testsuite/integration-arquillian/tests/base clean install` *note: 'cache-server-infinispan' can be replaced by 'cache-server-jdg'* *note: 'auth-server-wildfly can be replaced by auth-server-eap'* **note**: For **JBoss-based** Keycloak backend containers on real DB, the previous commands from (a2) and (b2) can be "squashed" into one. E.g.: `mvn -f testsuite/integration-arquillian clean install -Dtest=*.crossdc.* -Djdbc.mvn.groupId=org.mariadb.jdbc -Djdbc.mvn.artifactId=mariadb-java-client -Djdbc.mvn.version=2.0.3 -Dkeycloak.connectionsJpa.url=jdbc:mariadb://localhost:3306/keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsJpa.user=keycloak -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly,jpa clean install` #### Run "Manual" Cross-DC Tests from Maven Tests from package "manual" uses manual lifecycle for all servers, so needs to be executed manually. First prepare the environment and do the step (a) from previous paragraph. c1) For **Undertow** Keycloak backend containers, you can run the test using following command: `mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -Dtest=*.crossdc.manual.* -Dmanual.mode=true -Drun.h2=true -Dkeycloak.connectionsJpa.url.crossdc="jdbc:h2:tcp://localhost:9092/mem:keycloak-dc-shared;DB_CLOSE_DELAY=-1" -pl testsuite/integration-arquillian/tests/base clean install` *note: As you can see, there is a need to run TCP-Based H2 for this test. In-memory H2 won't work due the data need to persist the stop of all the Keycloak servers.* If you want to test with real DB like MySQL, you can run them with: `mvn -Pcache-server-infinispan,auth-servers-crossdc-undertow -Dtest=*.crossdc.manual.* -Dmanual.mode=true -Dkeycloak.connectionsJpa.url.crossdc=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver.crossdc=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -pl testsuite/integration-arquillian/tests/base clean install` c2) For **JBoss-based** Keycloak backend containers, you can run the tests like this: `mvn -Pcache-server-infinispan,auth-servers-crossdc-jboss,auth-server-wildfly -Dtest=*.crossdc.manual.* -Dmanual.mode=true -pl testsuite/integration-arquillian/tests/base clean install` *note: TCP-based H2 is used by default when running cross-dc tests on JBoss-based Keycloak container. So no need to explicitly specify it like in (c1) for undertow.* #### Run Cross-DC Tests from Intellij IDEA First we will manually download, configure and run infinispan servers. Then we can run the tests from IDE against the servers. It's more effective during development as there is no need to restart infinispan server(s) among test runs. 1) Download infinispan server 8.2.X from http://infinispan.org/download/ and go through the steps from the [Keycloak Cross-DC documentation](http://www.keycloak.org/docs/latest/server_installation/index.html#jdgsetup) for setup infinispan servers. The difference to original docs is, that you need to have JDG servers available on localhost with port offsets. So: * The TCPPING hosts should be like this: ```xml localhost[8610],localhost[9610]" ``` * The port offset when starting node `jdg1` should be like: `-Djboss.socket.binding.port-offset=1010` and when starting the `jdg2` server, then `-Djboss.socket.binding.port-offset=2010` . In both cases, the bind address should be just default `localhost` (In other words, the `-b` switch can be omitted). So assume you have both Infinispan/JDG servers up and running. 2) Setup MySQL database or some other shared database. 3) Ensure that `org.wildfly.arquillian:wildfly-arquillian-container-managed` is on the classpath when running test. On Intellij, it can be done by going to: `View` -> `Tool Windows` -> `Maven projects`. Then check profile `cache-server-infinispan` and `auth-servers-crossdc-undertow`. The tests will use this profile when executed. 4) Run the LoginCrossDCTest (or any other test) with those properties. In shortcut, it's using MySQL database and connects to the remoteStore provided by infinispan server configured in previous steps: `-Dauth.server.crossdc=true -Dauth.server.undertow.crossdc=true -Dcache.server.lifecycle.skip=true -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsJpa.url.crossdc=jdbc:mysql://localhost/keycloak -Dkeycloak.connectionsJpa.driver.crossdc=com.mysql.jdbc.Driver -Dkeycloak.connectionsJpa.user=keycloak -Dkeycloak.connectionsJpa.password=keycloak -Dkeycloak.connectionsInfinispan.clustered=true -Dkeycloak.connectionsInfinispan.remoteStorePort=12232 -Dkeycloak.connectionsInfinispan.remoteStorePort.2=13232 -Dkeycloak.connectionsInfinispan.sessionsOwners=1 -Dsession.cache.owners=1 -Dkeycloak.infinispan.logging.level=debug -Dresources` **NOTE**: Tests from package `manual` (eg. SessionsPreloadCrossDCTest) needs to be executed with managed containers. So skip steps 1,2 and add property `-Dmanual.mode=true` and change "cache.server.lifecycle.skip" to false `-Dcache.server.lifecycle.skip=false` or remove it. 5) If you want to debug or test manually, the servers are running on these ports (Note that not all backend servers are running by default and some might be also unused by loadbalancer): * *Loadbalancer* -> "http://localhost:8180/auth" * *auth-server-undertow-cross-dc-0_1* -> "http://localhost:8101/auth" * *auth-server-undertow-cross-dc-0_2-manual* -> "http://localhost:8102/auth" * *auth-server-undertow-cross-dc-1_1* -> "http://localhost:8111/auth" * *auth-server-undertow-cross-dc-1_2-manual* -> "http://localhost:8112/auth" ## Run Docker Authentication test First, validate that your machine has a valid docker installation and that it is available to the JVM running the test. The exact steps to configure Docker depend on the operating system. By default, the test will run against Undertow based embedded Keycloak Server, thus no distribution build is required beforehand. The exact command line arguments depend on the operating system. ### General guidelines If docker daemon doesn't run locally, or if you're not running on Linux, you may need to determine the IP of the bridge interface or local interface that Docker daemon can use to connect to Keycloak Server. Then specify that IP as additional system property called *host.ip*, for example: -Dhost.ip=192.168.64.1 If using Docker for Mac, you can create an alias for your local network interface: sudo ifconfig lo0 alias 10.200.10.1/24 Then pass the IP as *host.ip*: -Dhost.ip=10.200.10.1 If you're running a Docker fork that always lists a host component of an image on `docker images` (e.g. Fedora / RHEL Docker) use `-Ddocker.io-prefix-explicit=true` argument when running the test. ### Fedora On Fedora one way to set up Docker server is the following: # install docker sudo dnf install docker # configure docker # remove --selinux-enabled from OPTIONS sudo vi /etc/sysconfig/docker # create docker group and add your user (so docker wouldn't need root permissions) sudo groupadd docker && sudo gpasswd -a ${USER} docker && sudo systemctl restart docker newgrp docker # you need to login again after this # make sure Docker is available docker pull registry:2 You may also need to add an iptables rule to allow container to host traffic sudo iptables -I INPUT -i docker0 -j ACCEPT Then, run the test passing `-Ddocker.io-prefix-explicit=true`: mvn -f testsuite/integration-arquillian/tests/base/pom.xml \ clean test \ -Dtest=DockerClientTest \ -Dkeycloak.profile.feature.docker=enabled \ -Ddocker.io-prefix-explicit=true ### macOS On macOS all you need to do is install Docker for Mac, start it up, and check that it works: # make sure Docker is available docker pull registry:2 Be especially careful to restart Docker server after every sleep / suspend to ensure system clock of Docker VM is synchronized with that of the host operating system - Docker for Mac runs inside a VM. Then, run the test passing `-Dhost.ip=IP` where IP corresponds to en0 interface or an alias for localhost: mvn -f testsuite/integration-arquillian/tests/base/pom.xml \ clean test \ -Dtest=DockerClientTest \ -Dkeycloak.profile.feature.docker=enabled \ -Dhost.ip=10.200.10.1 ### Running Docker test against Keycloak Server distribution Make sure to build the distribution: mvn clean install -f distribution Then, before running the test, setup Keycloak Server distribution for the tests: mvn -f testsuite/integration-arquillian/servers/pom.xml \ clean install \ -Pauth-server-wildfly When running the test, add the following arguments to the command line: -Pauth-server-wildfly -Pauth-server-enable-disable-feature -Dfeature.name=docker -Dfeature.value=enabled