keycloak-scim/server_installation/topics/clustering/load-balancer.adoc

[[_setting-up-a-load-balancer-or-proxy]]
=== Setting Up a Load Balancer or Proxy

This section discusses a number of things you need to configure before you can put a reverse proxy or load balancer
in front of your clustered {project_name} deployment.  It also covers configuring the built in load balancer that
was <<_clustered-domain-example, Clustered Domain Example>>.


==== Identifying Client IP Addresses

A few features in {project_name} rely on the fact that the remote
address of the HTTP client connecting to the authentication server is the real IP address of the client machine. Examples include:

* Event logs - a failed login attempt would be logged with the wrong source IP address
* SSL required - if the SSL required is set to external (the default) it should require SSL for all external requests
* Authentication flows - a custom authentication flow that uses the IP address to for example show OTP only for external requests
* Dynamic Client Registration

This can be problematic when you have a reverse proxy or loadbalancer in front of your {project_name} authentication server.
The usual setup is that you have a frontend proxy sitting on a public network that load balances and forwards requests
to backend {project_name} server instances located in a private network.  There is some extra configuration you have to do in this scenario
so that the actual client IP address is forwarded to and processed by the {project_name} server instances.  Specifically:

* Configure your reverse proxy or loadbalancer to properly set `X-Forwarded-For` and `X-Forwarded-Proto` HTTP headers.
* Configure your reverse proxy or loadbalancer to preserve the original 'Host' HTTP header.
* Configure the authentication server to read the client's IP address from `X-Forwarded-For header`.

Configuring your proxy to generate the `X-Forwarded-For` and `X-Forwarded-Proto` HTTP headers and preserving the
 original `Host` HTTP header is beyond the scope of this guide.  Take extra precautions to ensure that the
`X-Forwared-For` header is set by your proxy.  If your proxy isn't configured correctly, then _rogue_ clients can set this header themselves and trick {project_name}
into thinking the client is connecting from a different IP address than it actually is.  This becomes really important if you are doing
any black or white listing of IP addresses.

Beyond the proxy itself, there are a few things you need to configure on the {project_name} side of things.
If your proxy is forwarding requests via the HTTP protocol, then you need to configure {project_name} to pull the client's
IP address from the `X-Forwarded-For` header rather than from the network packet.
To do this, open up the profile configuration file (_standalone.xml_, _standalone-ha.xml_, or _domain.xml_ depending on your
<<_operating-mode, operating mode>>) and look for the `{subsystem_undertow_xml_urn}` XML block.

.`X-Forwarded-For` HTTP Config
[source,xml,subs="attributes+"]
----
<subsystem xmlns="{subsystem_undertow_xml_urn}">
   <buffer-cache name="default"/>
   <server name="default-server">
      <ajp-listener name="ajp" socket-binding="ajp"/>
      <http-listener name="default" socket-binding="http" redirect-socket="https"
          proxy-address-forwarding="true"/>
      ...
   </server>
   ...
</subsystem>
----

Add the `proxy-address-forwarding` attribute to the `http-listener` element.  Set the value to `true`.

If your proxy is using the AJP protocol instead of HTTP to forward requests (i.e. Apache HTTPD + mod-cluster), then you have
to configure things a little differently.  Instead of modifying the `http-listener`, you need to add a filter to
pull this information from the AJP packets.


.`X-Forwarded-For` AJP Config
[source,xml,subs="attributes+"]
----
<subsystem xmlns="{subsystem_undertow_xml_urn}">
     <buffer-cache name="default"/>
     <server name="default-server">
         <ajp-listener name="ajp" socket-binding="ajp"/>
         <http-listener name="default" socket-binding="http" redirect-socket="https"/>
         <host name="default-host" alias="localhost">
             ...
             <filter-ref name="proxy-peer"/>
         </host>
     </server>
        ...
     <filters>
         ...
         <filter name="proxy-peer"
                 class-name="io.undertow.server.handlers.ProxyPeerAddressHandler"
                 module="io.undertow.core" />
     </filters>
 </subsystem>
----

==== Enable HTTPS/SSL with a Reverse Proxy

Assuming that your reverse proxy doesn't use port 8443 for SSL you also need to configure what port HTTPS traffic is redirected to.
[source,xml,subs="attributes+"]
----
<subsystem xmlns="{subsystem_undertow_xml_urn}">
    ...
    <http-listener name="default" socket-binding="http"
        proxy-address-forwarding="true" redirect-socket="proxy-https"/>
    ...
</subsystem>
----

Add the `redirect-socket` attribute to the `http-listener` element.  The value should be `proxy-https` which points to a
socket binding you also need to define.

Then add a new `socket-binding` element to the `socket-binding-group` element:

[source,xml]
----

<socket-binding-group name="standard-sockets" default-interface="public"
    port-offset="${jboss.socket.binding.port-offset:0}">
    ...
    <socket-binding name="proxy-https" port="443"/>
    ...
</socket-binding-group>
----

==== Verify Configuration

You can verify the reverse proxy or load balancer configuration by opening the path `/auth/realms/master/.well-known/openid-configuration`
through the reverse proxy. For example if the reverse proxy address is `\https://acme.com/` then open the URL
`\https://acme.com/auth/realms/master/.well-known/openid-configuration`. This will show a JSON document listing a number
of endpoints for {project_name}. Make sure the endpoints starts with the address (scheme, domain and port) of your
reverse proxy or load balancer. By doing this you make sure that {project_name} is using the correct endpoint.

You should also verify that {project_name} sees the correct source IP address for requests. Do check this you can
try to login to the admin console with an invalid username and/or password. This should show a warning in the server log
something like this:

[source]
----
08:14:21,287 WARN  XNIO-1 task-45 [org.keycloak.events] type=LOGIN_ERROR, realmId=master, clientId=security-admin-console, userId=8f20d7ba-4974-4811-a695-242c8fbd1bf8, ipAddress=X.X.X.X, error=invalid_user_credentials, auth_method=openid-connect, auth_type=code, redirect_uri=http://localhost:8080/auth/admin/master/console/?redirect_fragment=%2Frealms%2Fmaster%2Fevents-settings, code_id=a3d48b67-a439-4546-b992-e93311d6493e, username=admin
----

Check that the value of `ipAddress` is the IP address of the machine you tried to login with and not the IP address
 of the reverse proxy or load balancer.

==== Using the Built-In Load Balancer

This section covers configuring the built in load balancer that is discussed in the
<<_clustered-domain-example, Clustered Domain Example>>.

The <<_clustered-domain-example, Clustered Domain Example>> is only designed to run
on one machine.  To bring up a slave on another host, you'll need to

. Edit the _domain.xml_ file to point to your new host slave
. Copy the server distribution.  You don't need the _domain.xml_, _host.xml_, or _host-master.xml_ files.  Nor do you need
  the _standalone/_ directory.
. Edit the _host-slave.xml_ file to change the bind addresses used or override them on the command line



===== Register a New Host With Load Balancer

Let's look first at registering the new host slave with the load balancer configuration in _domain.xml_.  Open this
file and go to the undertow configuration in the `load-balancer` profile.  Add a new `host` definition called
`remote-host3` within the `reverse-proxy` XML block.

.domain.xml reverse-proxy config
[source,xml,subs="attributes+"]
----
<subsystem xmlns="{subsystem_undertow_xml_urn}">
  ...
  <handlers>
      <reverse-proxy name="lb-handler">
         <host name="host1" outbound-socket-binding="remote-host1" scheme="ajp" path="/" instance-id="myroute1"/>
         <host name="host2" outbound-socket-binding="remote-host2" scheme="ajp" path="/" instance-id="myroute2"/>
         <host name="remote-host3" outbound-socket-binding="remote-host3" scheme="ajp" path="/" instance-id="myroute3"/>
      </reverse-proxy>
  </handlers>
  ...
</subsystem>
----

The `output-socket-binding` is a logical name pointing to a `socket-binding` configured later in the _domain.xml_ file.
the `instance-id` attribute must also be unique to the new host as this value is used by a cookie to enable sticky
sessions when load balancing.

Next go down to the `load-balancer-sockets` `socket-binding-group` and add the `outbound-socket-binding` for `remote-host3`.  This new
binding needs to point to the host and port of the new host.

.domain.xml outbound-socket-binding
[source,xml]
----
<socket-binding-group name="load-balancer-sockets" default-interface="public">
    ...
    <outbound-socket-binding name="remote-host1">
        <remote-destination host="localhost" port="8159"/>
    </outbound-socket-binding>
    <outbound-socket-binding name="remote-host2">
        <remote-destination host="localhost" port="8259"/>
    </outbound-socket-binding>
    <outbound-socket-binding name="remote-host3">
        <remote-destination host="192.168.0.5" port="8259"/>
    </outbound-socket-binding>
</socket-binding-group>
----

===== Master Bind Addresses

Next thing you'll have to do is to change the `public` and `management` bind addresses for the master host.  Either
edit the _domain.xml_ file as discussed in the <<_bind-address, Bind Addresses>> chapter
or specify these bind addresses on the command line as follows:

[source]
----
$ domain.sh --host-config=host-master.xml -Djboss.bind.address=192.168.0.2 -Djboss.bind.address.management=192.168.0.2
----

===== Host Slave Bind Addresses

Next you'll have to change the `public`, `management`, and domain controller bind addresses (`jboss.domain.master-address`).  Either edit the
_host-slave.xml_ file or specify them on the command line as follows:

[source]
----
$ domain.sh --host-config=host-slave.xml
     -Djboss.bind.address=192.168.0.5
      -Djboss.bind.address.management=192.168.0.5
       -Djboss.domain.master.address=192.168.0.2
----

The values of `jboss.bind.address` and `jboss.bind.addres.management` pertain to the host slave's IP address.
The value of `jboss.domain.master.address` need to be the IP address of the domain controller which is the management address
of the master host.

==== Configuring Other Load Balancers

See link:{appserver_loadbalancer_link}[the load balancing] section in the _{appserver_loadbalancer_name}_ for information how to use other software-based load balancers.