{project_name} provides a Go programming language adapter for use with OpenID Connect (OIDC) that supports both access tokens in a browser cookie or bearer tokens.
This documentation details how to build and configure {generic_adapter_name} followed by details of how to use each of its features.
For further information, see the included help file which includes a full list of commands and switches. View the file by entering the following at the command line (modify the location to match where you install {generic_adapter_name}):
[source,bash]
----
$ bin/keycloak-gatekeeper help
----
==== Building
.Prerequisites
* Golang must be installed.
* Make must be installed.
.Procedure
- Run `make dep-install` to install all needed dependencies.
- Run `make test` to run the included tests.
- Run `make` to build the project. You can instead use `make static` if you prefer to build a binary that includes within it all of the required dependencies.
NOTE: You can also build via docker container: `make docker-build`. A Docker image is available at link:https://hub.docker.com/r/keycloak/keycloak-gatekeeper/[https://hub.docker.com/r/keycloak/keycloak-gatekeeper/].
# the secret associated to the 'client' application
client-secret: <CLIENT_SECRET>
# the interface definition you wish the proxy to listen, all interfaces is specified as ':<port>', unix sockets as unix://<REL_PATH>|</ABS PATH>
listen: 127.0.0.1:3000
# whether to enable refresh tokens
enable-refresh-tokens: true
# the location of a certificate you wish the proxy to use for TLS support
tls-cert:
# the location of a private key for TLS
tls-private-key:
# the redirection url, essentially the site url, note: /oauth/callback is added at the end
redirection-url: http://127.0.0.1:3000
# the encryption key used to encode the session state
encryption-key: <ENCRYPTION_KEY>
# the upstream endpoint which we should proxy request
upstream-url: http://127.0.0.1:80
# additional scopes to add to add to the default (openid+email+profile)
scopes:
- vpn-user
# a collection of resource i.e. urls that you wish to protect
resources:
- uri: /admin/test
# the methods on this url that should be protected, if missing, we assuming all
methods:
- GET
# a list of roles the user must have in order to access urls under the above
# If all you want is authentication ONLY, simply remove the roles array - the user must be authenticated but
# no roles are required
roles:
- openvpn:vpn-user
- openvpn:prod-vpn
- test
- uri: /admin/*
methods:
- GET
roles:
- openvpn:vpn-user
- openvpn:commons-prod-vpn
----
Options issued at the command line have a higher priority and will override or merge with options referenced in a config file. Examples of each style are shown here.
==== Example usage and configuration
Assuming you have some web service you wish protected by {project_name}:
* Create the *client* using the {project_name} GUI or CLI; the client protocol is *'openid-connect'*, access-type: *confidential*.
* Add a Valid Redirect URI of *http://127.0.0.1:3000/oauth/callback*.
* Grab the client id and client secret.
* Create the various roles under the client or existing clients for authorization purposes.
Here is an example configuration file.
[source,yaml]
----
client-id: <CLIENT_ID>
client-secret: <CLIENT_SECRET> # require for access_type: confidential
# Note the redirection-url is optional, it will default to the X-Forwarded-Proto / X-Forwarded-Host r the URL scheme and host not found
By default the roles defined on a resource perform a logical `AND` so all roles specified must be present in the claims, this behavior can be altered by the `require-any-role` option, however, so as long as one role is present the permission is granted.
==== HTTP routing
By default all requests will be proxyed on to the upstream, if you wish to ensure all requests are authentication you can use this:
[source,bash]
----
--resource=uri=/* # note, unless specified the method is assumed to be 'any|ANY'
----
The HTTP routing rules follow the guidelines from link:https://github.com/go-chi/chi#router-design[chi]. The ordering of the resources do not matter, the router will handle that for you.
==== Session-only cookies
By default the access and refresh cookies are session-only and disposed of on browser close; you can disable this feature using the `--enable-session-cookies` option.
==== Forward-signing proxy
Forward-signing provides a mechanism for authentication and authorization between services using tokens issued from the IdP. When operating in this mode the proxy will automatically acquire an access token (handling the refreshing or logins on your behalf) and tag outbound requests with a Authorization header. You can control which domains are tagged with the --forwarding-domains option. Note, this option use a **contains** comparison on domains. So, if you wanted to match all domains under *.svc.cluster.local you can use: --forwarding-domain=svc.cluster.local.
At present the service performs a login using oauth client_credentials grant type, so your IdP service must support direct (username/password) logins.
Example setup:
You have collection of micro-services which are permitted to speak to one another; you have already set up the credentials, roles, and clients in Keycloak, providing granular role controls over issue tokens.
On the receiver side you could set up the {generic_adapter_name_full} (--no=redirects=true) and permit this to verify and handle admission for you. Alternatively, the access token can found as a bearer token in the request.
==== Forwarding signed HTTPS connections
Handling HTTPS requires a man-in-the-middle sort of TLS connection. By default, if no `--tls-ca-certificate` and `--tls-ca-key` are provided the proxy will use the default certificate. If you wish to verify the trust, you'll need to generate a CA, for example.
The proxy supports an HTTP listener, so the only real requirement here is to perform an HTTP -> HTTPS redirect. You can enable the option like this:
[source,bash]
----
--listen-http=127.0.0.1:80
--enable-security-filter=true # is required for the https redirect
--enable-https-redirection
----
==== Let's Encrypt configuration
Here is an example of the required configuration for Let's Encrypt support:
[source,yaml]
----
listen: 0.0.0.0:443
enable-https-redirection: true
enable-security-filter: true
use-letsencrypt: true
letsencrypt-cache-dir: ./cache/
redirection-url: https://domain.tld:443/
hostnames:
- domain.tld
----
Listening on port 443 is mandatory.
==== Access token encryption
By default, the session token is placed into a cookie in plaintext. If you prefer to encrypt the session cookie, use the `--enable-encrypted-token` and `--encryption-key` options. Note that the access token forwarded in the X-Auth-Token header to upstream is unaffected.
==== Upstream headers
On protected resources, the upstream endpoint will receive a number of headers added by the proxy, along with custom claims, like this:
To control the `Authorization` header use the `enable-authorization-header` yaml configuration or the `--enable-authorization-header` command line option. By default this option is set to `true`.
You can inject additional claims from the access token into the authorization headers with the `--add-claims` option. For example, a token from a {project_name} provider might include the following claims:
[source,yaml]
----
"resource_access": {},
"name": "Beloved User",
"preferred_username": "beloved.user",
"given_name": "Beloved",
"family_name": "User",
"email": "beloved@example.com"
----
In order to request you receive the given_name, family_name and name in the authentication header we would add `--add-claims=given_name` and `--add-claims=family_name` and so on, or we can do it in the configuration file, like this:
[source,yaml]
----
add-claims:
- given_name
- family_name
- name
----
This would add the additional headers to the authenticated request along with standard ones.
[source,bash]
----
X-Auth-Family-Name: User
X-Auth-Given-Name: Beloved
X-Auth-Name: Beloved User
----
==== Encryption key
In order to remain stateless and not have to rely on a central cache to persist the refresh_tokens, the refresh token is encrypted and added as a cookie using *crypto/aes*. The key must be the same if you are running behind a load balancer. The key length should be either 16 or 32 bytes, depending or whether you want AES-128 or AES-256.
==== Claim matching
The proxy supports adding a variable list of claim matches against the presented tokens for additional access control. You can match the 'iss' or 'aud' to the token or custom attributes; each of the matches are regex's. For example, `--match-claims 'aud=sso.\*'` or `--claim iss=https://.*'` or via the configuration file, like this:
You can limit the email domain permitted; for example if you want to limit to only users on the example.com domain:
[source,yaml]
----
match-claims:
email: ^.*@example.com$
----
The adapter supports matching on multi-value strings claims. The match will succeed if one of the values matches, for example:
[source,yaml]
----
match-claims:
perms: perm1
----
will successfully match
[source,json]
----
{
"iss": "https://sso.example.com",
"sub": "",
"perms": ["perm1", "perm2"]
}
----
==== Group claims
You can match on the group claims within a token via the `groups` parameter available within the resource. While roles are implicitly required, such as `roles=admin,user` where the user MUST have roles 'admin' AND 'user', groups are applied with an OR operation, so `groups=users,testers` requires that the user MUST be within either 'users' OR 'testers'. The claim name is hard-coded to `groups`, so a JWT token would look like this:
[source,json]
----
{
"iss": "https://sso.example.com",
"sub": "",
"aud": "test",
"exp": 1515269245,
"iat": 1515182845,
"email": "beloved@example.com",
"groups": [
"group_one",
"group_two"
],
"name": "Beloved"
}
----
==== Custom pages
By default, {generic_adapter_name_full} will immediately redirect you for authentication and hand back a 403 for access denied. Most users will probably want to present the user with a more friendly sign-in and access denied page. You can pass the command line options (or via config file) paths to the files with `--signin-page=PATH`. The sign-in page will have a 'redirect' variable passed into the scope and holding the oauth redirection url. If you wish to pass additional variables into the templates, such as title, sitename and so on, you can use the -`-tags key=pair` option, like this: `--tags title="This is my site"` and the variable would be accessible from `{{ .title }}`.
[source,html]
----
<html>
<body>
<a href="{{ .redirect }}">Sign-in</a>
</body>
</html>
----
==== White-listed URL's
Depending on how the application URL's are laid out, you might want protect the root / url but have exceptions on a list of paths, for example `/health`. While this is best solved by adjusting the paths, you can add exceptions to the protected resources, like this:
The proxy support enforcing mutual TLS for the clients by adding the `--tls-ca-certificate` command line option or configuration file option. All clients connecting must present a certificate which was signed by the CA being used.
==== Certificate rotation
The proxy will automatically rotate the server certificates if the files change on disk. Note, no down time will occur as the change is made inline. Clients who connected prior to the certificate rotation will be unaffected and will continue as normal with all new connections presented with the new certificate.
==== Refresh tokens
If a request for an access token contains a refresh token and `--enable-refresh-tokens` is set to `true`, the proxy will automatically refresh the access token for you. The tokens themselves are kept either as an encrypted *(--encryption-key=KEY)* cookie *(cookie name: kc-state).* or a store *(still requires encryption key)*.
At present the only store options supported are link:https://github.com/antirez/redis[Redis] and link:https://github.com/boltdb/bolt[Boltdb].
To enable a local boltdb store use `--store-url boltdb:///PATH` or using a relative path `boltdb://PATH`.
To enable a local redis store use `redis://[USER:PASSWORD@]HOST:PORT`. In both cases the refresh token is encrypted before being placed into the store.
A */oauth/logout?redirect=url* is provided as a helper to log users out. In addition to dropping any session cookies, we also attempt to revoke access via revocation url (config *revocation-url* or *--revocation-url*) with the provider. For Keycloak, the url for this would be https://keycloak.example.com/auth/realms/REALM_NAME/protocol/openid-connect/logout. If the url is not specified we will attempt to grab the url from the OpenID discovery response.
You can add a CORS header via the `--cors-[method]` with these configuration options.
* Access-Control-Allow-Origin
* Access-Control-Allow-Methods
* Access-Control-Allow-Headers
* Access-Control-Expose-Headers
* Access-Control-Allow-Credentials
* Access-Control-Max-Age
You can add using the config file:
[source,yaml]
----
cors-origins:
- '*'
cors-methods:
- GET
- POST
----
or via the command line:
[source,bash]
----
--cors-origins [--cors-origins option] a set of origins to add to the CORS access control (Access-Control-Allow-Origin)
--cors-methods [--cors-methods option] the method permitted in the access control (Access-Control-Allow-Methods)
--cors-headers [--cors-headers option] a set of headers to add to the CORS access control (Access-Control-Allow-Headers)
--cors-exposes-headers [--cors-exposes-headers option] set the expose cors headers access control (Access-Control-Expose-Headers)
----
==== Upstream URL
You can control the upstream endpoint via the `--upstream-url` option. Both HTTP and HTTPS are supported with TLS verification and keep-alive support configured via the `--skip-upstream-tls-verify` / `--upstream-keepalives` option. Note, the proxy can also upstream via a UNIX socket, `--upstream-url unix://path/to/the/file.sock`.
==== Endpoints
* **/oauth/authorize** is authentication endpoint which will generate the OpenID redirect to the provider
* **/oauth/callback** is provider OpenID callback endpoint
* **/oauth/expired** is a helper endpoint to check if a access token has expired, 200 for ok and, 401 for no token and 401 for expired
* **/oauth/health** is the health checking endpoint for the proxy, you can also grab version from headers
* **/oauth/login** provides a relay endpoint to login via `grant_type=password`, for example, `POST /oauth/login` form values are `username=USERNAME&password=PASSWORD` (must be enabled)
* **/oauth/logout** provides a convenient endpoint to log the user out, it will always attempt to perform a back channel log out of offline tokens
* **/oauth/token** is a helper endpoint which will display the current access token for you
* **/oauth/metrics** is a Prometheus metrics handler
==== Metrics
Assuming `--enable-metrics` has been set, a Prometheus endpoint can be found on */oauth/metrics*; at present the only metric being exposed is a counter per HTTP code.
==== Limitations
Keep in mind link:http://browsercookielimits.squawky.net/[browser cookie limits] if you use access or refresh tokens in the browser cookie. Keycloak-generic-adapter divides the cookie automatically if your cookie is longer than 4093 bytes. Real size of the cookie depends on the content of the issued access token. Also, encryption might add additional bytes to the cookie size. If you have large cookies (>200 KB), you might reach browser cookie limits.
All cookies are part of the header request, so you might find a problem with the max headers size limits in your infrastructure (some load balancers have very low this value, such as 8 KB). Be sure that all network devices have sufficient header size limits. Otherwise, your users won't be able to obtain an access token.
==== Known Issues
* There is a known issue with the Keycloak server 4.7.0.Final in which Gatekeeper is unable to find the _client_id_ in the _aud_ claim. This is due to the fact the _client_id_ is not in the audience anymore. The workaround is to add the "Audience" protocol mapper to the client with the audience pointed to the _client_id_. For more information, see link:https://issues.jboss.org/browse/KEYCLOAK-8954[KEYCLOAK-8954].
